A tale of a serial cable

Beagleblog

Feb 17, 2009 GMT
Oliver Frommel

Finally the BeagleBoard has arrived. Unfortunately custom offices are charging me additional US$ 30. Ripping the package open I am shocked: It's so tiny! On first sight I can't find the OMAP processor. Almost by chance I find the explanation reading through some web site. Following the PoP construction principle (Package on a Package) the memory chip is mounted on the CPU.

A yellow LED shows that the power supply via the USB port is working. For connecting the BeagleBoard with a PC you need an AT/Everex serial cable, which plugs into the pin header of the board and has a RS-232 serial port on the other end. You might have a hard time getting one of these at your local dealer because stuff like this is considered "legacy" these days. So better order one together with your board.

Unfortunately the cable I found at some old-school dealer seems to have a different pinout than required. It just doesn't work whatever pinout or settings in the terminal program Minicom I try (it's 115200,8N1, no flow control for those who know). Luckily my workmate has recycled one that works from an old PC. So upon plugging in the BeagleBoard the TI boot loader appears:

Texas Instruments X-Loader 1.41
Starting OS Bootloader...
U-Boot 1.3.3 (Jul 10 2008 - 16:33:09)
OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
OMAP3 Beagle Board + LPDDR/NAND
DRAM: 128 MB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Audio Tone on Speakers ... complete
OMAP3 beagleboard.org #

That's US$4.50 down the drain for that alleged Everx cable, but whatever, it's working now. Next step will be to install an actual Linux distribution on the small computer.

Comments

  • Good tip on the details

    Good tip on the details of the cable jeff. I'm one of those perfectionists who likes to assmble as much of my system as I can - which includes the cables!

    Mike
  • Thanks

    thanks for your valuable hints and links
    Best
    Oliver

  • Everex cables

    The older Everex-style cables are actually pretty easy to alter---just strip a portion of the cable between the ends and have at it. You can figure out which wires go where with a multimeter. The beagle board only uses two pins (3 and 5). Reverse them to use a standard serial cable, or pin directly if using a null-modem cable. Here's my page on it:
    http://jefro.wordpress.com/...eagle-board-development-parts/
    but there are many better ones, particularly on Meld (http://meld.mvista.com) and elinux.org (http://elinux.org).

    Have fun!
comments powered by Disqus

Issue 167/2014

Buy this issue as a PDF

Digital Issue: Price $9.99
(incl. VAT)

News

njobs Europe
What:
Where:
Country:
Njobs Netherlands Njobs Deutschland Njobs United Kingdom Njobs Italia Njobs France Njobs Espana Njobs Poland
Njobs Austria Njobs Denmark Njobs Belgium Njobs Czech Republic Njobs Mexico Njobs India Njobs Colombia