Rescuing and restoring data
Padding
Both tools replace unreadable locations in the image file with zeros. Although this method might make it impossible to save the full structure, you might at least rescue part of it. Because the image generated by ddrescue
can be extremely large, you need to save it to a partition that can deal with these chunks of data. This means that external USB hard disks with FAT32 filesystems are not suitable.
The following example copies the content of the /dev/sde1
partition to /home/tim/copy.img
:
ddrescue /dev/sde1 /home/tim/copy.img logfile
This command stores information in logfile
that allows you to interrupt the copy with Ctrl+C and then continue later with the same command (Figure 4). You can also save the entire disk, rather than just the sde1 partition:
ddrescue /dev/sde /home/tim/copy.img logfile
This command makes sense in particular if blkid
does not recognize any partitions or if you know that the partition table is damaged. If possible, you should create a copy of the image you create. If rescue attempts fail, at least you do not need to waste time reading the faulty disk again. On a more granular level, if you cannot read an individual file, you can at least save its readable parts with the
ddrescue file.txt /media/rescue/file.txt
command.
Cliffhanger
Once you have used ddrescue
to back up a partition, you can try to mount the partition. The following command mounts it as read-only in the /mnt
directory for safety's sake:
mount -o loop,ro /home/tim/copy.img /mnt
Now back up all the important files from the /mnt
directory. In the case of the memory card from the camera, a few photos have already appeared again below /mnt
. After quickly checking with the photographer, it seems that more than half the shots are still missing. So, now it's time to fire the big guns, which only work on umounted media; in other words, time to umount /mnt
.
Checker
If the partition in question uses an ext filesystem, you can now use the command fsck
to fix it:
fsck.ext3 -p copy.img
The parameter -p
tells fsck
to correct the problems directly. On an ext4 filesystem, you would use fsck.ext4
instead of fsck.ext3
. Similarly, fsck.vfat
repairs partitions with a FAT32 filesystem, which is used on USB sticks and SD cards. Once fsck
has completed its work, you can mount the image as before and read the files.
Similar repair tools exist for other filesystems. On NTFS filesystems, for example, ntfsfix
will help; it is part of the ntfsprogs collection, which in turn is part of the NTFS driver. The tool is therefore installed by default on most distributions, so that the ntfsfix copy.img
command will fix the image directly.
« Previous 1 2 3 4 Next »
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Canonical Bumps LTS Support to 12 years
If you're worried that your Ubuntu LTS release won't be supported long enough to last, Canonical has a surprise for you in the form of 12 years of security coverage.
-
Fedora 40 Beta Released Soon
With the official release of Fedora 40 coming in April, it's almost time to download the beta and see what's new.
-
New Pentesting Distribution to Compete with Kali Linux
SnoopGod is now available for your testing needs
-
Juno Computers Launches Another Linux Laptop
If you're looking for a powerhouse laptop that runs Ubuntu, the Juno Computers Neptune 17 v6 should be on your radar.
-
ZorinOS 17.1 Released, Includes Improved Windows App Support
If you need or desire to run Windows applications on Linux, there's one distribution intent on making that easier for you and its new release further improves that feature.
-
Linux Market Share Surpasses 4% for the First Time
Look out Windows and macOS, Linux is on the rise and has even topped ChromeOS to become the fourth most widely used OS around the globe.
-
KDE’s Plasma 6 Officially Available
KDE’s Plasma 6.0 "Megarelease" has happened, and it's brimming with new features, polish, and performance.
-
Latest Version of Tails Unleashed
Tails 6.0 is based on Debian 12 and includes GNOME 43.
-
KDE Announces New Slimbook V with Plenty of Power and KDE’s Plasma 6
If you're a fan of KDE Plasma, you'll be thrilled to hear they've announced a new Slimbook with an AMD CPU and the latest version of KDE Plasma desktop.
-
Monthly Sponsorship Includes Early Access to elementary OS 8
If you want to get a glimpse of what's in the pipeline for elementary OS 8, just set up a monthly sponsorship to help fund its continued existence.