SystemRescueCd – a live system that rescues data and systems
Emergency Medicine
The SystemRescueCd live system contains numerous tools that you can use to recover deleted files or a defective system.
The SystemRescueCd live system above all offers programs with which you can reanimate defective data carriers and recover data. It includes the Firefox browser, which can also be used to search for solutions to a problem on the Internet if the permanently installed system fails to boot. Finally, SystemRescueCd provides useful tools for everyday work, such as creating or shrinking hard disk partitions. The live system relies on standard tools such as the well-known GParted for partitioning hard disks.
Bloated
As the CD in the name indicates, the SystemRescueCd fit on a CD for a long time. In version 6.0.0, however, the developers replaced the existing substructure with Arch Linux. As a result, the SystemRescueCd 6.0.2 (the latest release when this article was written), occupies almost 871MB of disk space. With a little luck, you can just about burn it onto an extra length CD (100-minute CD). But in any case, SystemRescueCd can be booted from a DVD or USB stick.
On the downside, the live system now only runs on 64-bit systems with Intel or AMD processors. If you want to save an ancient system with a 32-bit processor, you first need to remove the hard disk and, for example, connect it to another system via an external hard disk enclosure. Alternatively, you can turn to the older SystemRescueCd v5.3.2, which you can still find in the project archive [1]. Furthermore, SystemRescueCd will not start on systems where the secure boot mechanism is enabled: You first need to disable this in the BIOS or UEFI settings.
DIY Burning
To start using SystemRescueCd, go to the project website [2]. When you get there, click on Site map and then Download in the page's left margin; in the table that appears, then click on the file name next to Download link. Burn the resulting ISO image onto an extra-long CD or DVD using an appropriate program. The developers recommend K3b, Brasero, Xfburn, or cdrecord.
If you want to boot the live system from a USB stick, you only have to write the file with the extension .iso
to an empty USB stick. The SystemRescueCd developers recommend the dd
command-line tool for Linux.
In Listing 1, replace systemrescuecd-6.0.2.iso
with the file name of the downloaded ISO image and /dev/sdc
with the device name of the USB stick. Caution: dd
overwrites all the data on the target medium. Make sure that of=
is followed by the USB stick's device name. If in doubt, you can use lsblk
to list all data carriers. Further assistance for this process can be found on the project's website [3].
Listing 1
Writing SystemRescueCD to a USB Stick
$dd if=systemrescuecd-6.0.2.iso of=/dev/sdc; sync
Alternatively, you can order a USB stick with preinstalled SystemRescueCd from various retailers, such as OSDisc [4].
Booted
As soon as you boot a system from the prepared start medium, the menu in Figure 1 appears. Pressing the Enter key enables the first menu item and boots the live system directly. If you select Boot SystemRescueCd and copy system to RAM, SystemRescueCd first copies the complete boot media to the main memory and then starts the live system from there. After booting, you can remove the boot media, which can be advantageous for notebooks with only a few USB ports or only one DVD drive.
The other options in Figure 1 are only available if you launch the SystemRescueCd on a system with BIOS. Boot existing OS lets you start a system already installed on the computer. This is handy if you accidentally forgot the DVD with SystemRescueCd in the drive or the bootloader does not work. Run Memtest86+ (RAM test) starts the program of the same name, which checks the main memory for defects.
You should always run the tool if you suddenly notice strange system behavior while working on your system or if Linux starts to swap data to the hard disk extremely frequently. Older versions of SystemRescueCd had some additional tools in the menu, which had to be removed with version 6.0.0. Reboot and Power Off let you restart or shut down.
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Canonical Releases Ubuntu 24.04
After a brief pause because of the XZ vulnerability, Ubuntu 24.04 is now available for install.
-
Linux Servers Targeted by Akira Ransomware
A group of bad actors who have already extorted $42 million have their sights set on the Linux platform.
-
TUXEDO Computers Unveils Linux Laptop Featuring AMD Ryzen CPU
This latest release is the first laptop to include the new CPU from Ryzen and Linux preinstalled.
-
XZ Gets the All-Clear
The back door xz vulnerability has been officially reverted for Fedora 40 and versions 38 and 39 were never affected.
-
Canonical Collaborates with Qualcomm on New Venture
This new joint effort is geared toward bringing Ubuntu and Ubuntu Core to Qualcomm-powered devices.
-
Kodi 21.0 Open-Source Entertainment Hub Released
After a year of development, the award-winning Kodi cross-platform, media center software is now available with many new additions and improvements.
-
Linux Usage Increases in Two Key Areas
If market share is your thing, you'll be happy to know that Linux is on the rise in two areas that, if they keep climbing, could have serious meaning for Linux's future.
-
Vulnerability Discovered in xz Libraries
An urgent alert for Fedora 40 has been posted and users should pay attention.
-
Canonical Bumps LTS Support to 12 years
If you're worried that your Ubuntu LTS release won't be supported long enough to last, Canonical has a surprise for you in the form of 12 years of security coverage.
-
Fedora 40 Beta Released Soon
With the official release of Fedora 40 coming in April, it's almost time to download the beta and see what's new.