Update on the Intel e1000e Linux Bug
A bug in the series 2.6.27-rc Linux kernel can permanently damage Intel's e1000e Gigabit Ethernet card. Linux distributor Mandriva offers a few suggestions -- and not only to its own customers.
The kernel bug had been reported earlier against the Beta 1 versions of openSUSE 11.1 and SUSE Linux Enterprise 11. The openSUSE project had warned against using these versions with CPUs containing the Intel e1000e network card.
The French firm Mandriva has now publicized further details on its official blog. In Mandriva's case the bug affected all pre-releases of their Mandriva Linux 2009, but not any of their stable Linux releases or the final Mandriva Linux 2009.
Apparently ICH8 and ICH9 chipsets with the Intel 82566 and 82567 network interfaces were affected. Mandriva offers a few tips to remedy this in their blog. The first is to find the affected chipset by issuing the lspci command as root:
lspci | grep 8256
Then issue the lsmod command to determine if the network adapter is using the e1000e card:
/sbin/lsmod | grep e1000e
If any output is returned, the hardware is affected and the content of the EEPROM might be overwritten, causing damage to the card. To avoid this, Mandriva suggests issuing a command to back up the EEPROM data to a file for safekeeping:
ethtool -e ethX > savemyeep.txt
ethtool -E can't be usedIf the eth NVM is compromised, the system fails the NVM checksum and doesn't load the e1000e driver. Without the driver, the network interface is unavailable so ethtool -E reports that the interface eth0 doesn't exists.
Re-flashing the BIOS didn't help. The BIOS can be flashed successfully ensuring that no BIOS area is compromised, but the NVM seems to be excluded by the flash procedure.
Is anybody aware of an utility that can reprogram the NVM? Intel site seems quite empty of information about this.
Re: How to restore the dumped eeprom?Apparently this is more difficult than dumping the contents. I am told Intel have a set of proprietary tools for the job.
Re: How to restore the dumped eeprom?> How to restore the dumped eeprom? Using ethtool -E one byte at a time?
there's probably a better way, but you can definitely use a 'for' loop and solve the problem that way
How to restore the dumped eeprom?How to restore the dumped eeprom? Using ethtool -E one byte at a time?
Should you trust an online service to store your online passwords?
New B+ board lets you build cool things without the complication of a powered USB hub.
Redmond rushes in to root out alleged malware haven.
New initiative will bring futuristic virtual reality effects to the web surfing experience.
Dyreza malware launches a man-in-the-middle attack that compromises SSL.
New cloud combines worldwide access with local attention to data security.
A first cousin of the recent Heartbleed attack affects EAP-based wireless and peer-to-peer authentication.
FOSS community acts to protect freedom of choice for laptop devices.
Quintessential open source browser shores up its market share with a step toward the proprietary dark side.
Authorities in 16 countries take action against users of the imfamous BlackShades malware tool.