Reading temperature sensors with Perl


Article from Issue 65/2006

Linux lets tinkerers connect their hardware creations to computers. We’ll show you how you can use a simple Perl interface to check the temperature of your home or office while you’re away.

It’s not so long ago that users had to write their own device drivers to add hardware. But with the standardization of USB, and with fully-functional hot-plugging support in kernel 2.6, things have become far easier. The temperature sensor used in this article, a Dallas Semiconductor DS18S20 ([3]), can be controlled via the one-wire bus, which is driven by a USB dongle attached to the computer. The free owfs control software at [2] can request data via a Perl interface. Instead of one-wire, the bus should really be called two-wire, as two thin copper wires (typically in a single sheathing) connect the sensor to the USB dongle (see Figure 1). At the other end there is a western connector (RJ11), which plugs into the USB dongle.

Buy this article as PDF

Express-Checkout as PDF
Price $2.95
(incl. VAT)

Buy Linux Magazine

Get it on Google Play

US / Canada

Get it on Google Play

UK / Australia

Related content

  • Monitoring Beehives

    Beekeepers can get to know their colonies better without continuously disturbing the industrious insects. Using a Raspberry Pi and various sensors, two hobby beekeepers monitor the temperature and humidity of their hives, with plans to monitor their weight.

  • Charly's Column – Mi Flora

    Columnist Charly Kühnast recently attached Mi Flora humidity sensors to his potted plants. At first, they only transmitted junk on Bluetooth, but armed with the right tools and a Rasp Pi, Charly now reaps a rich harvest of data.

  • Monitorix 1.0.0 Monitors Hardware and Software

    Version 1.0.0 of the Monitorix monitoring program has just been released. It now shows fan speeds, and CPU, motherboard and hard disk temperatures among other system data.

  • Perl: Multimeter to Measure Power Consumption

    Today’s digital multimeters can do more than measure current and voltage. Multimeters also measure capacity and temperature. An inexpensive multimeter can talk to your PC via the serial port, and simple Perl scripts let you read and visualize data in neat charts.

  • SysUsage 3.0 Perl Tool in Thorough Rework

    The SysUsage monitoring tool is available in a new version 3.0 and provides a completely reworked Web interface.

comments powered by Disqus

Direct Download

Read full article as PDF:

Perl_Temperature_Sensors.pdf (306.93 kB)