Understanding the Linux startup process
Step 2: Loading the MBR
After the first boot-up checks have been completed, the BIOS will find the primary disk among the available disks and scan the first 512 bytes. Normally, the boot device is found in the Master Boot Record (MBR). The MBR (Figure 2) is a 512-byte area that contains 446 bytes of bootloader code, a 64-byte partition table, and the final two bytes for the boot signature. Initially, the BIOS is not aware of filesystems. As a result, the MBR is stored in a specific location on the disk, which is the first sector of the boot disk. Note that there is an MBR partition on every hard disk.
Step 3: The Bootloader Phase
After loading the MBR, the system executes the 446 bytes of the primary bootloader. This code is stored at the start of the MBR. The boot sector of the boot disk is located at this location. The bootloader code or the bootstrap code is usually called the Stage 1 bootloader. This code is too small to do any major function like calling a kernel. However, it can simplify things by locating and loading another set of blocks from the partition that contains all the code needed for loading the kernel. This code is actually the Stage 2 bootloader.
The most common Stage 2 bootloader for Linux systems is GNU GRand Unified Bootloader (GRUB). However, there are a number of other options that are not dependent on a certain OS. The main purpose of the Stage 2 bootloader program is to locate the Linux kernel code (a disk image), which is usually inside the /boot
filesystem [3], decompress it, read it into memory as per the GRUB configuration file, and transfer control of the system over to the kernel to move on the boot process.
Step 4: The Kernel Phase
Once the kernel starts running, it initializes the system's hardware to determine what devices are present. Also, it initializes the system's device drivers, which allow it to communicate with the hardware. Further, it sets up the system's memory management, and then it mounts the root filesystem, which contains the root directory of the system. Finally, it starts the init process from /sbin/init
, which is the systemd process. Systemd is a replacement for the old SysVinit process and is the first userspace process to run on the system with the PID of 1.
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Red Hat Adds New Deployment Option for Enterprise Linux Platforms
Red Hat has re-imagined enterprise Linux for an AI future with Image Mode.
-
OSJH and LPI Release 2024 Open Source Pros Job Survey Results
See what open source professionals look for in a new role.
-
Proton 9.0-1 Released to Improve Gaming with Steam
The latest release of Proton 9 adds several improvements and fixes an issue that has been problematic for Linux users.
-
So Long Neofetch and Thanks for the Info
Today is a day that every Linux user who enjoys bragging about their system(s) will mourn, as Neofetch has come to an end.
-
Ubuntu 24.04 Comes with a “Flaw"
If you're thinking you might want to upgrade from your current Ubuntu release to the latest, there's something you might want to consider before doing so.
-
Canonical Releases Ubuntu 24.04
After a brief pause because of the XZ vulnerability, Ubuntu 24.04 is now available for install.
-
Linux Servers Targeted by Akira Ransomware
A group of bad actors who have already extorted $42 million have their sights set on the Linux platform.
-
TUXEDO Computers Unveils Linux Laptop Featuring AMD Ryzen CPU
This latest release is the first laptop to include the new CPU from Ryzen and Linux preinstalled.
-
XZ Gets the All-Clear
The back door xz vulnerability has been officially reverted for Fedora 40 and versions 38 and 39 were never affected.
-
Canonical Collaborates with Qualcomm on New Venture
This new joint effort is geared toward bringing Ubuntu and Ubuntu Core to Qualcomm-powered devices.