Access data from a weather station with the Raspberry Pi
Weather Watch

If you have a weather station that allows you to access data via a USB port, you can use your Raspberry Pi to analyze the data and publish the results via a web application.
My new weather station [1] has several sensors for wind, rain, and temperature, as well as a USB cable and evaluation software (Figure 1), albeit a desktop-only Windows application. However, I wanted to record the measured data and, if possible, access it on my cell phone while I was on the move.

Positioning a Windows PC running 24/7 next to my weather station was not an option; instead, I set my sights on the Raspberry Pi. Thus far, I had used it as a tiny media center with an equally tiny speaker, but by using its USB connection, my Pi could read the data output from the weather station. The power requirement is negligible compared with that of a full-size PC, and the Pi is silent. The question then arose: How can I acquire the data via USB if the station only comes with a Windows program?
Pi Configuration
Your Raspberry Pi can be freshly installed with the official recommended Debian Raspbian "wheezy" image from the Download page on the Raspberry Pi website [2]. The tool set necessary to complete this project comprises a C program, Ruby, the Sinatra web application library, a database, and graphing software, all of which are introduced in the "Ingredient" sections of this article. Figure 2 shows how all the components interact and fit together.
Note that you do not have to install a web server. The Ruby script in Listing 4 is the complete web server and web application; Sinatra loads a simple web server for the application when the script is executed (see "Ingredient 3").
Ingredient 1: A Small C Program
A small program written by John Sebastian named te923tool
[3] can read the data output by many weather stations based on HIDEKI. With some minor niggles, the program also works for my TFA Nexus. I only needed to compile the source code on my Raspberry Pi. For this to work, you need the developer tools gcc
, make
, and libusb-dev
.
After unpacking the archive, calling make
should give you the te923con
program. A test with the te923con -h
command not only informed me as to whether the program was running, it also provided detailed help for the program. If all is well, a call without any parameters returns the measured data:
$ sudo ./te923con 1363468817:20.40:50:i:i:i:i:i:i:i:i:-1.90:60:1008.0:i:5:0:14:0.4:0.6:-3.8:115
You will need to use sudo
here because access to the USB port requires root privileges.
Notice the values between the colons. The Help function explains that an "i" stands for values that could not be assigned. Although the first field is not explained, it is Unix time (i.e., the number of seconds since the Unix epoch, or January 1, 1970). Calling
date -d @1363468817 +%c
in the terminal converts this number into a legible date: Sat 16 Mar 2013 22:20:17 CET.
In a cron job, I run te923con
and redirect the output to a text file named weather.csv
, which a Ruby script then uses to populate a database.
Ingredient 2: Ruby
Ruby is the perfect way to process data and feed it to a web server. The numerous libraries that can be installed via Ruby's own package management system, RubyGem, include the ActiveRecord database interface and Sinatra web server. These two libraries later provide the core of the application. Ruby can be installed on the Raspberry Pi from the Debian repositories; however, for a more recent version that is easier to manage, you need the Ruby version management system rbenv
[4].
Because rbenv
is installed from a GitHub.com source, you need to install the git
package up front. Some Ruby libraries are also compiled before the installation on the target system. To be able to install additional libraries later, you will also want to install the zlib1g-dev
, libsqlite3-dev
, libssl-dev
, and libreadline6-dev
libraries as Debian package sources.
For instructions on installing rbenv
, check out the program website; then, you can run
rbenv install 2.0.0-p0
to install the current version of Ruby. On the Raspberry Pi, that can take a while. Before you can use Ruby, you need to call
rbenv global 2.0.0-p0
to define this version as the default for the user. A test with ruby -v
shows that the installation worked.
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Direct Download
Read full article as PDF:
Price $2.95
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Find SysAdmin Jobs
News
-
The Next Major Release of Elementary OS has Arrived
It's been over a year since the developers of elementary OS released version 6.1 (Jólnir) but they've finally made their latest release (Horus) available with a renewed focus on the user.
-
KDE Plasma 5.27 Beta is Ready for Testing
The latest beta iteration of the KDE Plasma desktop is now available and includes some important additions and fixes.
-
Netrunner OS 23 Is Now Available
The latest version of this Linux distribution is now based on Debian Bullseye and is ready for installation and finally hits the KDE 5.20 branch of the desktop.
-
New Linux Distribution Built for Gamers
With a Gnome desktop that offers different layouts and a custom kernel, PikaOS is a great option for gamers of all types.
-
System76 Beefs Up Popular Pangolin Laptop
The darling of open-source-powered laptops and desktops will soon drop a new AMD Ryzen 7-powered version of their popular Pangolin laptop.
-
Nobara Project Is a Modified Version of Fedora with User-Friendly Fixes
If you're looking for a version of Fedora that includes third-party and proprietary packages, look no further than the Nobara Project.
-
Gnome 44 Now Has a Release Date
Gnome 44 will be officially released on March 22, 2023.
-
Nitrux 2.6 Available with Kernel 6.1 and a Major Change
The developers of Nitrux have officially released version 2.6 of their Linux distribution with plenty of new features to excite users.
-
Vanilla OS Initial Release Is Now Available
A stock GNOME experience with on-demand immutability finally sees its first production release.
-
Critical Linux Vulnerability Found to Impact SMB Servers
A Linux vulnerability with a CVSS score of 10 has been found to affect SMB servers and can lead to remote code execution.