Intel's powerful new Xeon Phi co-processor
Operating System
Because the Xeon Phi has full-fledged cores, not just highly optimized special-purpose computing units, it can run its own operating system. Intel leverages this ability to manage the board's resources and simplify software development.
When the host computer boots, the Xeon Phi first appears as a normal PCI device; the processor on the board is inactive. To activate the card, the host system's system management controller helps load an initrd image with a built-in BusyBox into the Xeon Phi's memory.
The Linux kernel used on the Xeon Phi differs only slightly from an ordinary x86 kernel; the necessary adjustments are comparable to those for an ARM image. After the image is transferred, the processor is started, and Linux is booted on the card for the first time. The coprocessor either uses initrd directly as the root filesystem, or it loads a filesystem from the host computer to the memory card, or it uses NFS to retrieve a filesystem.
Data Exchange
The PCIe bus allows the host system to write data to a memory expansion card. Conversely, expansion cards can also write to the memory of the host computer. However, writing directly to the memory of the host system is extremely awkward for an application programmer because this kind of low-level data transfer usually only takes place at the driver level. Intel therefore provides the Symmetric Communications Interface (SCIF), a library that includes an easy-to-use interface for low-level data transfer at the memory level. SCIF is the most efficient way of exchanging data between the host computer and the Xeon Phi card, and it also provides a means for transferring the root file system to the memory of the card.
Networking via Virtio
Intel has implemented additional data exchange options. The most important of these options integrates the card into a network. Intel uses the Virtio framework [5], among other things, for network access. Virtio provides virtual Ethernet interfaces on both the host system and the card's operating system, with the data traveling across the PCIe bus. The Ethernet interfaces operates in typical Linux style. In other words, the virtual Ethernet interface on the host operating system can connect to a physical port on the host computer and the Linux running on the card can join the local network via the virtual network interface (Figure 2).
Following the same principle, Intel has also implemented a virtual serial port and a virtual block device. The virtual serial port is designed to transfer the boot log, debug messages, and other status information to the host computer. The block device is actually intended to provide the Linux swap space on the card, but if you modify the init scripts supplied by Intel appropriately, it also provides a root filesystem and thus basically a fourth option for booting the card.
« Previous 1 2 3 Next »
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
NVIDIA Released Driver for Upcoming NVIDIA 560 GPU for Linux
Not only has NVIDIA released the driver for its upcoming CPU series, it's the first release that defaults to using open-source GPU kernel modules.
-
OpenMandriva Lx 24.07 Released
If you’re into rolling release Linux distributions, OpenMandriva ROME has a new snapshot with a new kernel.
-
Kernel 6.10 Available for General Usage
Linus Torvalds has released the 6.10 kernel and it includes significant performance increases for Intel Core hybrid systems and more.
-
TUXEDO Computers Releases InfinityBook Pro 14 Gen9 Laptop
Sporting either AMD or Intel CPUs, the TUXEDO InfinityBook Pro 14 is an extremely compact, lightweight, sturdy powerhouse.
-
Google Extends Support for Linux Kernels Used for Android
Because the LTS Linux kernel releases are so important to Android, Google has decided to extend the support period beyond that offered by the kernel development team.
-
Linux Mint 22 Stable Delayed
If you're anxious about getting your hands on the stable release of Linux Mint 22, it looks as if you're going to have to wait a bit longer.
-
Nitrux 3.5.1 Available for Install
The latest version of the immutable, systemd-free distribution includes an updated kernel and NVIDIA driver.
-
Debian 12.6 Released with Plenty of Bug Fixes and Updates
The sixth update to Debian "Bookworm" is all about security mitigations and making adjustments for some "serious problems."
-
Canonical Offers 12-Year LTS for Open Source Docker Images
Canonical is expanding its LTS offering to reach beyond the DEB packages with a new distro-less Docker image.
-
Plasma Desktop 6.1 Released with Several Enhancements
If you're a fan of Plasma Desktop, you should be excited about this new point release.