Use your Chromebook with Linux
Preparations
To modify the hardware, you initially switch the device to root or developer mode. To do this, press Esc+F3, and at the same time switch on the device. Chromebooks have a slightly modified keyboard without dedicated F-keys, you need to take into account that the Refresh button on the Google device is the F3 key (Figure 1).

After a warning message telling you that Chrome OS is supposedly missing, which you can skip by pressing Ctrl+D, the operating system displays a mask for logging on. You need to register with Google here and then sign up with the access data of your new Google account.
If you are already registered with Google, you can log in with the existing data to authenticate. The device is now in developer mode, and you can switch it off again.
The next step is to remove the read-only protection for the firmware, which requires opening the unit. Hewlett-Packard provides for all its devices, including the Chromebook, detailed documentation in the form of service guide PDF file [9]. Because both devices have BIOS modules that allow writing and both are protected by a screw, you need to remove the screw to modify the firmware (Figure 2).
You should strictly follow the instructions to avoid accidentally damaging other components. The screws are marked by a large triangle printed on the circuit board next to them and have a flat, oversized head. After removing the write-protect screw, reassemble the device; no further hardware intervention is needed. Then reboot and skip the messages again by pressing Ctrl+D.
After signing on and enabling the Internet connection by entering the data for the purpose of authentication, press Ctrl+Alt+T to pop up a terminal. Enter the shell
command at the Crosh Developer prompt to launch bash. Subsequently, enter the command sequence from Listing 1.
Listing 1
Load Alternative Firmware
This loads the alternative firmware from the specified website and installs it. When replacing the firmware, follow the messages on the screen precisely, because incorrect input will destroy the firmware and lead to an unusable system.
The routine installs the free Coreboot code, to start the mainboard and all its components. Then, the script loads the SeaBIOS as payload for Coreboot. Because these operations are transparent, no more manual settings are necessary. After successfully replacing the firmware on the device, turn the machine off.
Preparing a USB Stick
Then, download the ISO image from GalliumOS from the project site and install it on a USB stick. This needs to be a device with at least 4GB capacity; you should delete all partitions before installing the ISO image. First, type the lsblk
command to discover the USB flash drive's name.
Remove any existing partitions on the drive by typing the fdisk/dev/<device file>
or cfdisk/dev/<device file>
, taking care to replace the placeholder with the correct name in each case. You need to enter both commands with administrator rights.
After following the steps to delete all partitions, unmount the stick. Now copy the ISO image from GalliumOS to the storage medium by typing the command dd if=<Image-Datei> of=/dev/ bs=1M
. The process can take up to several minutes depending on the throughput of the system.
When done, type the sync
command to write all the data from memory to the device. Then, remove the stick from your computer and plug it into the USB port on the Chromebook.
First Start
When you first start the Chromebook with the USB stick plugged, the host calls the SeaBIOS and branches to the GRUB boot manager on the Flash stick, in which you can launch GalliumOS Live. The second option in the Boot Manager GalliumOS CLI boots the live version of the operating system up to a login prompt but does not enable the desktop.
The option GalliumOS Live Image and Installer booted on the modified HP Chromebook without any trouble and very quickly showed us a live system with a visually customized Xfce desktop (Figure 3).
« Previous 1 2 3 Next »
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Direct Download
Read full article as PDF:
Price $2.95
News
-
The 14" Pinebook Pro Linux Laptop is Shipping
After a considerable delay, the 14" version of the Pinebook Pro laptop is, once again, available for purchase.
-
OpenMandriva Lx ROME Technical Preview Released
OpenMandriva’s rolling release distribution technical preview has been released for testing purposes and adds some of the latest/greatest software into the mix.
-
Linux Mint 21 is Now Available
The latest iteration of Linux Mint, codenamed Vanessa, has been released with a new upgrade tool and other fantastic features.
-
Firefox Adds Long-Anticipated Feature
Firefox 103 has arrived and it now includes a feature users have long awaited…sort of.
-
System76 Refreshes Their Popular Oryx Pro Laptop with a New CPU
The System76 Oryx Pro laptop has been relaunched with a 12th Gen CPU and more powerful graphics options.
-
Elive Has Released a New Beta
The Elive team is proud to announce the latest beta version (3.8.30) of its Enlightenment-centric Linux distribution.
-
Rocky Linux 9 Has Arrived
The latest iteration of Rocky Linux is now available and includes a host of new features and support for new architecture.
-
Slimbook Executive Linux Ultrabook Upgrading Their CPUs
The Spanish-based company, Slimbook, has made available their next generation Slimbook Executive Linux ultrabooks with a 12th Gen Intel Alder Lake CPU.
-
Fedora Linux is Coming to the Raspberry Pi 4
Thanks to significant work in the upstream, the upcoming release of Fedora 37 will introduce support for the Raspberry Pi 4.
-
New Linux Ultrabook from TUXEDO Computers
TUXEDO Computers has released a new 15" Ultrabook running Linux.