Z-Wave – Basics of wireless technology for the smart home
Bridging Unreachable Distances
Depending on the nature of the house, the Z-Wave signal between the transmitter and receiver can traverse a number of rooms. The range varies, depending on the version of the device and thickness of the walls to be crossed, and is usually around 30 to 100 feet. Z-Wave's proprietary mesh network allows greater distances to be bridged, however. In addition to their primary tasks as switches or sensors, many Z-Wave devices also act as routers for other signals that a controller wants to send to recipients that are out of range.
For this to happen, the controller tells the devices to locate and report their neighbors during initialization. If the controller then wants to send a message to one of these devices later on, but can't because of the limited range, it sends a packet with the routing information to the device that previously reported this neighbor. The device then forwards the package, on the basis of the received routing table, to the target, which can subsequently communicate back to the controller along the same path in the opposite direction (Figure 4).
Based on this procedure, Z-Wave builds a mesh network between the devices that can dynamically adjust its routes in case of an error. Each device on the network receives its own node ID; all the devices in a home are grouped under a home ID. This means that a particular device knows with certainty that a packet whizzing around in the ether is intended for it, and not for another node on the mesh network.
Power Supply
Z-Wave devices come in three different categories in terms of the power source and corresponding performance profiles. Devices with a steady power supply via a socket outlet permanently listen for wireless signals and process them immediately on receipt. They therefore often provide router functions for other devices in the mesh.
In the case of battery-powered devices (e.g., door locks), this is not easily possible if you want the battery to last for a reasonable amount of time. The device wakes up at regular intervals, checks for radio signals in the air, and then starts to decode and possibly process them.
The third category includes devices, such as remote controls, that do absolutely nothing in idle mode and only wake up and send signals at the push of a button. They are not usually reachable for a controller in the opposite direction.
Regional Differences
The release of radio spectra is subject to the control of national governments, so Z-Wave devices operate on different frequencies depending on the country. For example, Z-Wave devices in the United States send on 908.4MHz, whereas devices in Germany use 868.4MHz. Although a transmitter and a receiver from the same country will work elsewhere, the combination cannot be legally operated on an unapproved frequency. Instead, users need to purchase devices with the certified frequencies for their countries.
« Previous 1 2 3 Next »
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
NVIDIA Released Driver for Upcoming NVIDIA 560 GPU for Linux
Not only has NVIDIA released the driver for its upcoming CPU series, it's the first release that defaults to using open-source GPU kernel modules.
-
OpenMandriva Lx 24.07 Released
If you’re into rolling release Linux distributions, OpenMandriva ROME has a new snapshot with a new kernel.
-
Kernel 6.10 Available for General Usage
Linus Torvalds has released the 6.10 kernel and it includes significant performance increases for Intel Core hybrid systems and more.
-
TUXEDO Computers Releases InfinityBook Pro 14 Gen9 Laptop
Sporting either AMD or Intel CPUs, the TUXEDO InfinityBook Pro 14 is an extremely compact, lightweight, sturdy powerhouse.
-
Google Extends Support for Linux Kernels Used for Android
Because the LTS Linux kernel releases are so important to Android, Google has decided to extend the support period beyond that offered by the kernel development team.
-
Linux Mint 22 Stable Delayed
If you're anxious about getting your hands on the stable release of Linux Mint 22, it looks as if you're going to have to wait a bit longer.
-
Nitrux 3.5.1 Available for Install
The latest version of the immutable, systemd-free distribution includes an updated kernel and NVIDIA driver.
-
Debian 12.6 Released with Plenty of Bug Fixes and Updates
The sixth update to Debian "Bookworm" is all about security mitigations and making adjustments for some "serious problems."
-
Canonical Offers 12-Year LTS for Open Source Docker Images
Canonical is expanding its LTS offering to reach beyond the DEB packages with a new distro-less Docker image.
-
Plasma Desktop 6.1 Released with Several Enhancements
If you're a fan of Plasma Desktop, you should be excited about this new point release.