Assembler programming on the Raspberry Pi
Assembler on Pi
© Lead Image © elenabsl, 123RF.com
Talk to your Raspberry Pi in its native assembler language.
Assembler programs run directly on the computer's hardware, which means they can reach nearly the maximum achievable speed of execution. Because assembler program code is very low level, writing the code is more complicated, but it is still the best choice for some tasks, especially on a computer such as the Raspberry Pi with its limited resources. Before you can start creating programs, however, you need to plumb the depths of the CPU and peripheral architecture.
Machine Code
To begin, it makes sense to clarify some terms. The CPU only understands machine code – zeros and ones or, more precisely, voltage levels that represent zeros and ones. Each command in machine code has a human-readable abbreviation that is easy to remember. These abbreviations are known as mnemonics and act as assembler commands. Assembler code is specific to a CPU architecture, which means that code for a Raspberry Pi (ARM) will not run on a PC (x86).
Programming in assembler on the Raspberry Pi can be approached in two ways: First, you can create an image in which you package the code and then boot the small-board computer (SBC) from that image to run the program. In other words, you degrade the Raspberry Pi to a microcontroller. With this method, the Pi runs without an operating system. Although you have full access to everything, you don't even get a shell.
[...]
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
US / Canada
UK / Australia
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Plasma Bigscreen Returns
A developer discovered that the Plasma Bigscreen feature had been sitting untouched, so he decided to do something about it.
-
CachyOS Now Lets Users Choose Their Shell
Imagine getting the opportunity to select which shell you want during the installation of your favorite Linux distribution. That's now a thing.
-
Wayland 1.24 Released with Fixes and New Features
Wayland continues to move forward, while X11 slowly vanishes into the shadows, and the latest release includes plenty of improvements.
-
Bugs Found in sudo
Two critical flaws allow users to gain access to root privileges.
-
Fedora Continues 32-Bit Support
In a move that should come as a relief to some portions of the Linux community, Fedora will continue supporting 32-bit architecture.
-
Linux Kernel 6.17 Drops bcachefs
After a clash over some late fixes and disagreements between bcachefs's lead developer and Linus Torvalds, bachefs is out.
-
ONLYOFFICE v9 Embraces AI
Like nearly all office suites on the market (except LibreOffice), ONLYOFFICE has decided to go the AI route.
-
Two Local Privilege Escalation Flaws Discovered in Linux
Qualys researchers have discovered two local privilege escalation vulnerabilities that allow hackers to gain root privileges on major Linux distributions.
-
New TUXEDO InfinityBook Pro Powered by AMD Ryzen AI 300
The TUXEDO InfinityBook Pro 14 Gen10 offers serious power that is ready for your business, development, or entertainment needs.
-
LibreOffice Tested as Possible Office 365 Alternative
Another major organization has decided to test the possibility of migrating from Microsoft's Office 365 to LibreOffice.