The A to Z of designing printed circuit boards
Etching a Sketch
© Lead Image © Viktoriya Sukhanova, 123RF.com
Take your electronic projects to the next level with your own PCB designs.
Many makers start in electronics by using pre-built modules: typically a module with a microcontroller (e.g., Arduino, Raspberry Pi, ESP32, or STM32 variant) and another board with some type of I/O (e.g., an accelerometer, camera, temperature sensor, or relay). They join these boards together with wire links, often without the need for soldering, to make a functional prototype. So far so good. The advantages of this approach are flexibility, speed, and low cost: They can keep making changes until they have the required functionality.
However, projects like this can be difficult to package in a compact manner and inevitably contain unneeded circuitry, and the wire links might not be durable over time. It can also be an expensive solution if more than one prototype is required. If you want your project to use a component not available on a module, run from batteries, have custom displays, or any variety of requirements, the need for a more flexible solution becomes yet more apparent.
You might move on to other prototyping systems, like soldering components onto a stripboard and wiring them up with soldered wire links. This approach worked well when I started out in the business 40 years ago, but today, many interesting components are just not available in through-hole form on the 2.5mm/0.1-inch pitch that was the standard back then.
[...]
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
The Latest CachyOS Features Supercharged Kernel
The latest release of CachyOS brings with it an enhanced version of the latest Linux kernel.
-
Kernel 7.0 Is a Bit More Rusty
Linux kernel 7.0 has been released for general availability, with Rust finally getting its due.
-
France Says "Au Revoir" to Microsoft
In a move that should surprise no one, France announced plans to reduce its reliance on US technology, and Microsoft Windows is the first to get the boot.
-
CIQ Releases Compatibility Catalog for Rocky Linux
The company behind Rocky Linux is making an open catalog available to developers, hobbyists, and other contributors, so they can verify and publish compatibility with the CIQ lineup.
-
KDE Gets Some Resuscitation
KDE is bringing back two themes that vanished a few years ago, putting a bit more air under its wings.
-
Ubuntu 26.04 Beta Arrives with Some Surprises
Ubuntu 26.04 is almost here, but the beta version has been released, and it might surprise some people.
-
Ubuntu MATE Dev Leaving After 12 years
Martin Wimpress, the maintainer of Ubuntu MATE, is now searching for his successor. Are you the next in line?
-
Kali Linux Waxes Nostalgic with BackTrack Mode
For those who've used Kali Linux since its inception, the changes with the new release are sure to put a smile on your face.
-
Gnome 50 Smooths Out NVIDIA GPU Issues
Gamers rejoice, your favorite pastime just got better with Gnome 50 and NVIDIA GPUs.
-
System76 Retools Thelio Desktop
The new Thelio Mira has landed with improved performance, repairability, and front-facing ports alongside a high-quality tempered glass facade.