PiJuice HAT for battery-powered Pi Zero
Out in Space

© Lead Image © Anton Brand,123RF.com
The Raspberry Pi Zero is a frugal little computer. But without a power socket, you might be surprised how quickly it can drain a battery. Active power management is the order of the day.
A Raspberry Pi Zero (W) can require upwards of 100mA – depending on what it is doing. This may not sound like much at first, but given a standard industrial LiPo cell rated at 2,200mAh, that computer won't even last a day. This makes it all the more important to use the battery's energy sparingly. HATs (Hardware Attached on Top) by PiJuice, which have been around for some time, have the circuitry to help you do this. In this article, we take a look at the PiJuice Zero [1], a pHAT that is optimized for the Raspberry Pi Zero (Figure 1).
Use Cases
But first, let's take a brief look at potential application scenarios for a power management HAT: A Raspberry Pi that is connected to a power outlet but needs to run continuously requires UPS protection (UPS being an uninterruptible power supply). If worst comes to worst, the back-up battery can step in at lightning speed and bridge the gap until the power grid is available again.
A second use case is in normal battery-based operation, for example when the Pi is running far away from civilization. The HAT must supply the board with a stable voltage, even if the battery voltage gradually drops. Ideally, the HAT also measures the charge status and reports it to the Pi. A monitoring program can then shut down the computer in good time, which in turn protects the battery from deep discharge. In both examples, there is also a requirement for sophisticated charging management. Instead of replacing the battery, in the second case a solar panel typically recharges the battery, while the UPS uses the power grid for this task.
[...]
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.

News
-
Fedora Continues 32-Bit Support
In a move that should come as a relief to some portions of the Linux community, Fedora will continue supporting 32-bit architecture.
-
Linux Kernel 6.17 Drops bcachefs
After a clash over some late fixes and disagreements between bcachefs's lead developer and Linus Torvalds, bachefs is out.
-
ONLYOFFICE v9 Embraces AI
Like nearly all office suites on the market (except LibreOffice), ONLYOFFICE has decided to go the AI route.
-
Two Local Privilege Escalation Flaws Discovered in Linux
Qualys researchers have discovered two local privilege escalation vulnerabilities that allow hackers to gain root privileges on major Linux distributions.
-
New TUXEDO InfinityBook Pro Powered by AMD Ryzen AI 300
The TUXEDO InfinityBook Pro 14 Gen10 offers serious power that is ready for your business, development, or entertainment needs.
-
Danish Ministry of Digital Affairs Transitions to Linux
Another major organization has decided to kick Microsoft Windows and Office to the curb in favor of Linux.
-
Linux Mint 20 Reaches EOL
With Linux Mint 20 at its end of life, the time has arrived to upgrade to Linux Mint 22.
-
TuxCare Announces Support for AlmaLinux 9.2
Thanks to TuxCare, AlmaLinux 9.2 (and soon version 9.6) now enjoys years of ongoing patching and compliance.
-
Go-Based Botnet Attacking IoT Devices
Using an SSH credential brute-force attack, the Go-based PumaBot is exploiting IoT devices everywhere.
-
Plasma 6.5 Promises Better Memory Optimization
With the stable Plasma 6.4 on the horizon, KDE has a few new tricks up its sleeve for Plasma 6.5.