More light!
Charly's Column – Hue and Rasp Pi
Since his Trådfri Smarthome article over a year ago, sys admin columnist Charly has been receiving messages from readers with two questions: "Can you do that with the Philips' Hue system?" and "Can this also be done with a normal brightness sensor?" Yes and yes!
In a previous issue [1], I described how I control a smart light in my living room with Ikea's Trådfri system and Linux. The darker it gets, the more I turn up the lights. Around the same time, Martin Loschwitz then explained how he used a Raspberry Pi and a transmitter module to control Hue and other Zigbee devices [2].
Now I'm going to do it again, without the Zigbee module, but I expect to use a Hue bridge, which Martin's approach doesn't need, and because not everyone has a roof-top photovoltaic system, this time I focused on a simple brightness sensor.
Getting Started
First, I discovered the IP address of my Hue Bridge: 10.0.0.8. Then I pressed the button on the bridge and entered the following at the command line:
curl --data "{\"devicetype\": \"huelr\"}" http://10.0.0.8/api
The huelr
string (for "Hue living room") is freely selectable. I got some output like:
[{"success":{"username":"T3VGtGWmFUgJwHufxkudY1bizvqoZMhCSqu1ySwm"}}]
This unpronounceable string is an authentication string, which I have to specify with every call in the future. A (confusing) list of all connected devices is returned by the command:
curl --request GET 10.0.0.8/api/T3VGtGWmFUgJwHufxkudY1bizvqoZMhCSqu1ySwm
If you only need information about lights, you can append /lights
to the command or /lights/1
, /lights/2
, and so on for each lamp. The following command switches lamp 1 to medium brightness (value 125
):
curl --request PUT --data "{\"bri\":125}" 10.0.0.8/api/T3VGtGWmFUgJwHufxkudY1bizvqoZMhCSqu1ySwm/lights/1/state
For the brightness sensor, I used a $2.00 module named BH1750 (online, e.g., [3]). I connected this to the I2C bus of a Raspberry Pi (Figure 1). I used the Zero W model with WiFi – it has to communicate with the bridge.

Cat's Eyes
Raspbian comes with almost everything you need, with only a few packages to add:
sudo apt install build-essential wiringpi i2c-tools python-smbus
The program in Listing 1 reads the sensor in the program I named lux
:
cc lux.c -lwiringPi mv a.out lux && chmod 755 lux
Listing 1
lux.c
01 #include <wiringPiI2C.h> 02 #include <stdio.h> 03 int main (void) { 04 int handle = wiringPiI2CSetup(0x23); 05 wiringPiI2CWrite(handle,0x10); 06 sleep(1); 07 int word=wiringPiI2CReadReg16(handle,0x00); 08 int lux=((word & 0xff00)>>8) | ((word & 0x00ff)<<8); 09 printf("%d \n",lux); 10 return 0; 11 }
If you run lux
, you will see the current measured value for the photo sensor in lux units. Depending on this, you can now control your smart lighting.
Infos
- "Charly's Column: libcoap" by Charly Kühnast, Linux Pro Magazine, issue 202, September 2017, pg. 49: http://www.linuxpromagazine.com/Issues/2017/202/Enlightened-libcoap/(language)/eng-US
- "Controlling Zigbee Devices with the Raspberry Pi" by Martin Loschwitz, Linux-Magazin, September 2017, pg. 76: http://www.linux-magazin.de/ausgaben/2017/09/raspi-spricht-zigbee/ [in German]
- Debo BH1750: https://www.ebay.com/i/292393778070?chn=ps
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Direct Download
Read full article as PDF:
Price $2.95
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Find SysAdmin Jobs
News
-
The Next Major Release of Elementary OS Has Arrived
It's been over a year since the developers of elementary OS released version 6.1 (Jólnir) but they've finally made their latest release (Horus) available with a renewed focus on the user.
-
KDE Plasma 5.27 Beta Is Ready for Testing
The latest beta iteration of the KDE Plasma desktop is now available and includes some important additions and fixes.
-
Netrunner OS 23 Is Now Available
The latest version of this Linux distribution is now based on Debian Bullseye and is ready for installation and finally hits the KDE 5.20 branch of the desktop.
-
New Linux Distribution Built for Gamers
With a Gnome desktop that offers different layouts and a custom kernel, PikaOS is a great option for gamers of all types.
-
System76 Beefs Up Popular Pangolin Laptop
The darling of open-source-powered laptops and desktops will soon drop a new AMD Ryzen 7-powered version of their popular Pangolin laptop.
-
Nobara Project Is a Modified Version of Fedora with User-Friendly Fixes
If you're looking for a version of Fedora that includes third-party and proprietary packages, look no further than the Nobara Project.
-
Gnome 44 Now Has a Release Date
Gnome 44 will be officially released on March 22, 2023.
-
Nitrux 2.6 Available with Kernel 6.1 and a Major Change
The developers of Nitrux have officially released version 2.6 of their Linux distribution with plenty of new features to excite users.
-
Vanilla OS Initial Release Is Now Available
A stock GNOME experience with on-demand immutability finally sees its first production release.
-
Critical Linux Vulnerability Found to Impact SMB Servers
A Linux vulnerability with a CVSS score of 10 has been found to affect SMB servers and can lead to remote code execution.