Rescuing and restoring data
Disk Workshop
If you need to use ddrescue
to rescue a whole data storage medium rather than just one partition, you can run fdisk -l copy.img
to see whether the partition table is still present and correct. This gives you a list of all partitions, with the numbers behind the names in the first column matching the respective numbers in the device files.
If you are repairing a disk with the newer GPT (GUID partition table), use gdisk
[3]. You might have to install this tool using the package manager. On Ubuntu, it resides in the gdisk package. The following command:
gdisk -l copy.img
lists partitions in the image.
Finds
If you are missing one or more partitions, you can run TestDisk against the image [4]. This program tries to detect and recover partitions. You will need to install TestDisk [5] using the package manager; on Ubuntu, it resides in the testdisk package. Then, you simply call the tool and pass in the image file with testdisk copy.img
, which takes you to the text-based user interface (Figure 5).

At the top, TestDisk again presents the image file. Make sure that Proceed is highlighted at the bottom and press Enter. Next, you need to let TestDisk know whether the drive uses the modern GPT. In this case, select EFI GPT; otherwise, use Intel. Finally, restart with Analysis.
TestDisk now shows a summary of the current situation in the upper part of the window. Missing or duplicate partitions in the list indicate a defect. In this case, launch Quick Search. TestDisk runs a search and then lists all the partitions it finds (Figure 6). Pressing P lets you look at the files and directories on a partition; the arrow and Enter keys are used for navigation. Pressing Q takes you back to the list of all partitions.
After the tool has tracked down all the partitions, select Write. If you are still missing one or several partitions, select Deeper Search. TestDisk then performs an in-depth analysis, which takes a little longer. It might even reveal ancient partitions that partially overlap. Access the previously missing partition in the list; if in doubt, just guess. Use the arrow keys to make a primary or logical partition from the rediscovered partition. This partition is then restored by TestDisk.
TestDisk ignores all partitions with a D in the first column, so they remain deleted. When you are satisfied, press Enter and write the new partition table with Write. Press Y to confirm the prompt and then press OK to enable the write. Quit lets you go back a menu until TestDisk finally quits.
Choices
To mount the restored partitions, use the package manager to install the kpartx
program, which is part of the multipath-tools package (on Ubuntu, the package goes by the same name) and then point it to the image file:
kpartx -a -v copy.img
The tool now creates a separate device below /dev/mapper
for each partition in the image file. You only have to read the device file for your partition in the information displayed and then mount
(Figure 7):
mount -o loop,ro /dev/mapper/loop0p1 /mnt
The command in this example mounts the first partition (loop0p1
) from the image in the /mnt
subdirectory.
« Previous 1 2 3 4 Next »
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Direct Download
Read full article as PDF:
Price $2.95
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you've found an article to be beneficial.
News
-
Armbian 23.05 is Now Available
Based on Debian 12, the latest version of the ARM/RISC-V distribution is now available to download and install.
-
Linux Mint Finally Receiving Support for Gestures
If you use the Linux Mint Cinnamon desktop, you'll be thrilled to know that 21.2 is getting support for gestures on touchscreen devices and touchpads.
-
An All-Snap Version of Ubuntu is In The Works
Along with the standard deb version of the open-source operating system, Canonical will release an-all snap version.
-
Mageia 9 Beta 2 Ready for Testing
The latest beta of the popular Mageia distribution now includes the latest kernel and plenty of updated applications.
-
KDE Plasma 6 Looks to Bring Basic HDR Support
The KWin piece of KDE Plasma now has HDR support and color management geared for the 6.0 release.
-
Bodhi Linux 7.0 Beta Ready for Testing
The latest iteration of the Bohdi Linux distribution is now available for those who want to experience what's in store and for testing purposes.
-
Changes Coming to Ubuntu PPA Usage
The way you manage Personal Package Archives will be changing with the release of Ubuntu 23.10.
-
AlmaLinux 9.2 Now Available for Download
AlmaLinux has been released and provides a free alternative to upstream Red Hat Enterprise Linux.
-
An Immutable Version of Fedora Is Under Consideration
For anyone who's a fan of using immutable versions of Linux, the Fedora team is currently considering adding a new spin called Fedora Onyx.
-
New Release of Br OS Includes ChatGPT Integration
Br OS 23.04 is now available and is geared specifically toward web content creation.