Triggering regular tasks with Systemd
Alarm Clock

Systemd can start timers that automatically perform tasks at specified times. The configuration files are known as timer units.
You might want to use your Linux system to automatically create a backup every evening and rotate the log files at regular intervals. In most distributions, time-controlled tasks are handled by the Cron daemon. But Systemd is an interesting alternative to Cron. Systemd controls the startup process of most distributions, and it can also trigger time-controlled and recurring tasks.
Service Providers
The first task is to tell Systemd which task to perform. To do this, you create a configuration file, the Service Unit. Listing 1 shows an example.
Listing 1
Service Unit
[Unit] Description=Create a backup of the system [Service] ExecStart=/usr/bin/backup.sh /mnt
A service unit is a text file divided into several sections. The [Service]
section is required. ExecStart=
is followed by the command to be executed by the system. In Listing 1, Systemd would simply run a script that backs up the system to the /mnt
directory. The [Unit]
section adds some metadata. In the simplest case, Description=
is followed by a description of the task.
Service Units usually tell Systemd which services to boot when the system starts. (See the article on Systemd units elsewhere in this issue.) Systemd also supports additional sections and settings. However, since the system just needs to schedule the task, these settings are not (absolutely) necessary. In particular, you can leave out the complete [Install]
section.
Save the newly created service unit to /etc/systemd/system
. The filename corresponds to the (internal) name of the service unit. It must be unique among all service units and end with .service
, as in backup.service
. Systemd can also start existing service units or service units supplied by the distribution on a time-controlled basis. In this case, simply make a note of the filename of the service file.
Tick-Tock
To avoid burning the cake to a crisp, most hobby bakers set a kitchen timer. In a similar way, you need to set a separate timer for a task you wish to assign to Systemd.
First, create a new text file in the /etc/system/system
subdirectory. The text file should have the same filename as the service unit you created earlier, but it ends with .timer
. In the example, the file would be named backup.timer
. In Systemd speak, the file with the .timer
extension is known as the timer unit. In the timer unit, you describe when the timer should "go off," at which point, Systemd will start the backup.
The structure of a timer unit is very similar to that of a service unit. As the example from Listing 2 shows, it typically consists of three sections: [Unit]
is followed by general information about the timer. In Listing 2, this information would include a Description=
that serves mainly as a reminder for the user. Make a note on why the timer exists and what actions it triggers.
Listing 2
Timer Unit
[Unit] Description=Create a daily backup of the system [Timer] OnCalendar=*-*-* 18:15:00 Persistent=true RandomizedDelaySec=2h [Install] ZWantedBy=timers.target
Current Events
In the next section, [Timer]
, you tell Systemd when to start the task. Make a note of this time after OnCalendar=
in the notation weekday year-month-day hour:minutes: seconds. The setting OnCalendar=Fr 2018-11-30 12:00:00
tells Systemd to create the backup on Friday, November 30, 2018 at noon precisely. You can omit unnecessary information, such as the day of the week or the seconds.
Normally, you will not want Systemd to run the task once only, but repeat it. To set up a repeating event, you can simply list the corresponding days, dates, and times separated by commas. In the example from the first line of Listing 3, Systemd starts the backup November 30, 2018 at 1AM and 12 Noon.
Listing 3
Date and Time
OnCalendar=2018-11-30 01,12:00:00 OnCalendar=2018-01..12-01 01,12:00:00 OnCalendar= 2018-*-01 01,12:00:00
You can also abbreviate the number ranges with two dots ..
, which means that you do not have to list all the months, for example. The entry from the second line of Listing 3, tells Systemd to take action on the first day of each month. If the statement applies to all months, you can also use the wildcard *
(line three).
The *-*-*
entry from Listing 2 tells Systemd to run the backup every day at 18:15 in every month and every year.
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Direct Download
Read full article as PDF:
Price $2.95
News
-
Titan Linux is a New KDE Linux Based on Debian Stable
Titan Linux is a new Debian-based Linux distribution that features the KDE Plasma desktop with a focus on usability and performance.
-
Danielle Foré Has an Update for elementary OS 7
Now that Ubuntu 22.04 has been released, the team behind elementary OS is preparing for the upcoming 7.0 release.
-
Linux New Media Launches Open Source JobHub
New job website focuses on connecting technical and non-technical professionals with organizations in open source.
-
Ubuntu Cinnamon 22.04 Now Available
Ubuntu Cinnamon 22.04 has been released with all the additions from upstream as well as other features and improvements.
-
Pop!_OS 22.04 Has Officially Been Released
From the makers of some of the finest Linux-powered desktop and laptop computers on the market comes the latest version of their Ubuntu-based distribution, Pop!_OS 22.04.
-
Star Labs Unveils a New Small Format Linux PC
The Byte Mk I is an AMD-powered mini Linux PC with Coreboot support and plenty of power.
-
MX Linux Verison 21.1 “Wildflower” Now Available
The latest release of the systemd-less MX Linux is now ready for public consumption.
-
Microsoft Expands Their Windows Subsystem for Linux Offerings With AlmaLinux
Anyone who works with Windows Subsystem for Linux (WSL) will now find a new addition to the available distributions, one that’s become the front-runner replacement for CentOS.
-
Debian 11.3 Released wIth Numerous Bug and Security Fixes
The latest point release for Debian Bullseye is now available with some very important updates.
-
The First Alpha of Asahi Linux is Available
Asahi Linux is the first distribution to fully support Apple Silicon and is now available for testing.