An introduction to electronic weighing
Software Development
The use of IDEs can be controversial and very much a matter of taste, and it's certainly possible to do this type of microcontroller development without one. The ARM compilers and standard libraries can be downloaded from your distro's repository, and you're off, using any editor that suits you and Make or Cmake – again, your choice. Once you have a compiled binary, utilities for ST-Link allow you to program your device, and you can use GDB (the GNU debugger) to debug you program.
That said, ST's STM32CubeIDE, based on Eclipse, does streamline the process by integrating ST's CubeMX tool, a utility that allows you to configure your microcontroller and generate a software framework that does all the initialization and leaves you with a blank main()
function to add to your code. You can label the pins of the microcontroller (bonus points if you use the same names as on the schematic!).
The pin configuration for this design is shown in Figure 7. Once saved, the IDE generates a set of #define
directives for the I/O pins that you can use in your code and a complete set of initialization routines. At this point, you can continue to use the IDE or ignore it and use Make with the generated makefile. However, if you stay with the IDE and have your hardware connected by an ST-Link programmer, a single mouse click compiles, downloads, and runs your code. This level of preconfiguration – including, if you want, the inclusion of a real-time operating system (RTOS) such as FreeRTOS – can leave you free to concentrate on your application code. In a commercial environment, time to market is everything, and time savings like this can be invaluable.
Serial I/O and printf
My hardware design and microcontroller configuration includes a serial port for debugging. Being able to output data and wait for keystrokes during debugging can be invaluable as an alternative to, or as an adjunct to, a debugger. The STM32 libraries make it easy to override the low-level routines that printf
and scanf
eventually call and redirect them to a serial port (Listing 1). Once this is done, these functions are available from whatever terminal (e.g., the Linux minicom
tool) you choose to connect to the serial port. This serial port could also be used in an application for batch weighing, in which an external computer or programmable logic controller (PLC) monitors the weight signal on a continuous basis.
Listing 1
Overriding Low-Level I/O Primitives
01 /** read from the serial port */ 02 int _read(int file, char *ptr, int len) 03 { 04 HAL_UART_Receive(&huart1, (uint8_t *)ptr, 1, -1); 05 return 1; 06 } 07 08 /** write to the serial port */ 09 int _write(int file, char *ptr, int len) 10 { 11 int DataIdx; 12 13 for (DataIdx = 0; DataIdx < len; DataIdx++) 14 { 15 if (*ptr == '\n') 16 { 17 HAL_UART_Transmit(&huart1, (uint8_t *)"\r\n", 2, -1); 18 } 19 else 20 { 21 HAL_UART_Transmit(&huart1, (uint8_t *)ptr, 1, -1); 22 } 23 ptr++; 24 } 25 return len; 26 } 27 28 /** wait for a keystroke */ 29 uint8_t kbhit(void) 30 { 31 return __HAL_UART_GET_FLAG(&huart1, UART_FLAG_RXNE); 32 }
ADC Driver
The ADS1232 has a very simple two-wire serial interface with no configuration registers, so all setup (clock speed, gain, etc.) happens from pins on the chip. To read the data from the chip, the software must first wait for a valid sample, which it does by waiting for the DOUT (data out) line to go low (Listing 2). At this point, data is clocked out in a serial manner by pulsing the clock pin from low to high and reading the resulting data bit from DOUT. This process is repeated 24 times to clock out a complete 24-bit sample. A further clock pulse resets DOUT to its "data ready" function.
Listing 2
Reading the ADC
01 /** wait for ADC sample ready and read it out */ 02 uint32_t ADS1232_Read(void) 03 { 04 int32_t value = 0; 05 06 // wait for DOUT to go low : data ready 07 while (HAL_GPIO_ReadPin(ADC_NDRDY_DOUT_GPIO_Port, ADC_NDRDY_DOUT_Pin)) 08 ; 09 10 for (uint8_t i = 0; i < 24; i++) 11 { 12 value = value << 1; 13 14 // send clock pulse 15 HAL_GPIO_WritePin(ADC_SCLK_GPIO_Port, ADC_SCLK_Pin, 1); 16 HAL_GPIO_WritePin(ADC_SCLK_GPIO_Port, ADC_SCLK_Pin, 0); 17 18 // read the data in 19 if (HAL_GPIO_ReadPin(ADC_NDRDY_DOUT_GPIO_Port, ADC_NDRDY_DOUT_Pin)) 20 { 21 value |= 1; 22 } 23 } 24 25 // reset DOUT 26 HAL_GPIO_WritePin(ADC_SCLK_GPIO_Port, ADC_SCLK_Pin, 1); 27 HAL_GPIO_WritePin(ADC_SCLK_GPIO_Port, ADC_SCLK_Pin, 0); 28 29 // 24-32 bit 2s complement conversion 30 value <<= 8; 31 value /= 256; 32 33 return (value); 34 }
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Rhino Linux Announces Latest "Quick Update"
If you prefer your Linux distribution to be of the rolling type, Rhino Linux delivers a beautiful and reliable experience.
-
Plasma Desktop Will Soon Ask for Donations
The next iteration of Plasma has reached the soft feature freeze for the 6.2 version and includes a feature that could be divisive.
-
Linux Market Share Hits New High
For the first time, the Linux market share has reached a new high for desktops, and the trend looks like it will continue.
-
LibreOffice 24.8 Delivers New Features
LibreOffice is often considered the de facto standard office suite for the Linux operating system.
-
Deepin 23 Offers Wayland Support and New AI Tool
Deepin has been considered one of the most beautiful desktop operating systems for a long time and the arrival of version 23 has bolstered that reputation.
-
CachyOS Adds Support for System76's COSMIC Desktop
The August 2024 release of CachyOS includes support for the COSMIC desktop as well as some important bits for video.
-
Linux Foundation Adopts OMI to Foster Ethical LLMs
The Open Model Initiative hopes to create community LLMs that rival proprietary models but avoid restrictive licensing that limits usage.
-
Ubuntu 24.10 to Include the Latest Linux Kernel
Ubuntu users have grown accustomed to their favorite distribution shipping with a kernel that's not quite as up-to-date as other distros but that changes with 24.10.
-
Plasma Desktop 6.1.4 Release Includes Improvements and Bug Fixes
The latest release from the KDE team improves the KWin window and composite managers and plenty of fixes.
-
Manjaro Team Tests Immutable Version of its Arch-Based Distribution
If you're a fan of immutable operating systems, you'll be thrilled to know that the Manjaro team is working on an immutable spin that is now available for testing.