Access data from a weather station with the Raspberry Pi
Weather Watch

If you have a weather station that allows you to access data via a USB port, you can use your Raspberry Pi to analyze the data and publish the results via a web application.
My new weather station [1] has several sensors for wind, rain, and temperature, as well as a USB cable and evaluation software (Figure 1), albeit a desktop-only Windows application. However, I wanted to record the measured data and, if possible, access it on my cell phone while I was on the move.

Positioning a Windows PC running 24/7 next to my weather station was not an option; instead, I set my sights on the Raspberry Pi. Thus far, I had used it as a tiny media center with an equally tiny speaker, but by using its USB connection, my Pi could read the data output from the weather station. The power requirement is negligible compared with that of a full-size PC, and the Pi is silent. The question then arose: How can I acquire the data via USB if the station only comes with a Windows program?
Pi Configuration
Your Raspberry Pi can be freshly installed with the official recommended Debian Raspbian "wheezy" image from the Download page on the Raspberry Pi website [2]. The tool set necessary to complete this project comprises a C program, Ruby, the Sinatra web application library, a database, and graphing software, all of which are introduced in the "Ingredient" sections of this article. Figure 2 shows how all the components interact and fit together.
Note that you do not have to install a web server. The Ruby script in Listing 4 is the complete web server and web application; Sinatra loads a simple web server for the application when the script is executed (see "Ingredient 3").
Ingredient 1: A Small C Program
A small program written by John Sebastian named te923tool
[3] can read the data output by many weather stations based on HIDEKI. With some minor niggles, the program also works for my TFA Nexus. I only needed to compile the source code on my Raspberry Pi. For this to work, you need the developer tools gcc
, make
, and libusb-dev
.
After unpacking the archive, calling make
should give you the te923con
program. A test with the te923con -h
command not only informed me as to whether the program was running, it also provided detailed help for the program. If all is well, a call without any parameters returns the measured data:
$ sudo ./te923con 1363468817:20.40:50:i:i:i:i:i:i:i:i:-1.90:60:1008.0:i:5:0:14:0.4:0.6:-3.8:115
You will need to use sudo
here because access to the USB port requires root privileges.
Notice the values between the colons. The Help function explains that an "i" stands for values that could not be assigned. Although the first field is not explained, it is Unix time (i.e., the number of seconds since the Unix epoch, or January 1, 1970). Calling
date -d @1363468817 +%c
in the terminal converts this number into a legible date: Sat 16 Mar 2013 22:20:17 CET.
In a cron job, I run te923con
and redirect the output to a text file named weather.csv
, which a Ruby script then uses to populate a database.
Ingredient 2: Ruby
Ruby is the perfect way to process data and feed it to a web server. The numerous libraries that can be installed via Ruby's own package management system, RubyGem, include the ActiveRecord database interface and Sinatra web server. These two libraries later provide the core of the application. Ruby can be installed on the Raspberry Pi from the Debian repositories; however, for a more recent version that is easier to manage, you need the Ruby version management system rbenv
[4].
Because rbenv
is installed from a GitHub.com source, you need to install the git
package up front. Some Ruby libraries are also compiled before the installation on the target system. To be able to install additional libraries later, you will also want to install the zlib1g-dev
, libsqlite3-dev
, libssl-dev
, and libreadline6-dev
libraries as Debian package sources.
For instructions on installing rbenv
, check out the program website; then, you can run
rbenv install 2.0.0-p0
to install the current version of Ruby. On the Raspberry Pi, that can take a while. Before you can use Ruby, you need to call
rbenv global 2.0.0-p0
to define this version as the default for the user. A test with ruby -v
shows that the installation worked.
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Direct Download
Read full article as PDF:
Price $2.95
News
-
Kali Linux 2022.3 Released
From the creators of the most popular penetration testing distributions on the planet, comes a new release with some new tools and a community, real-time chat option.
-
The 14" Pinebook Pro Linux Laptop is Shipping
After a considerable delay, the 14" version of the Pinebook Pro laptop is, once again, available for purchase.
-
OpenMandriva Lx ROME Technical Preview Released
OpenMandriva’s rolling release distribution technical preview has been released for testing purposes and adds some of the latest/greatest software into the mix.
-
Linux Mint 21 is Now Available
The latest iteration of Linux Mint, codenamed Vanessa, has been released with a new upgrade tool and other fantastic features.
-
Firefox Adds Long-Anticipated Feature
Firefox 103 has arrived and it now includes a feature users have long awaited…sort of.
-
System76 Refreshes Their Popular Oryx Pro Laptop with a New CPU
The System76 Oryx Pro laptop has been relaunched with a 12th Gen CPU and more powerful graphics options.
-
Elive Has Released a New Beta
The Elive team is proud to announce the latest beta version (3.8.30) of its Enlightenment-centric Linux distribution.
-
Rocky Linux 9 Has Arrived
The latest iteration of Rocky Linux is now available and includes a host of new features and support for new architecture.
-
Slimbook Executive Linux Ultrabook Upgrading Their CPUs
The Spanish-based company, Slimbook, has made available their next generation Slimbook Executive Linux ultrabooks with a 12th Gen Intel Alder Lake CPU.
-
Fedora Linux is Coming to the Raspberry Pi 4
Thanks to significant work in the upstream, the upcoming release of Fedora 37 will introduce support for the Raspberry Pi 4.