Exploring Microsoft's forgotten Unix distribution
Getting Started: VirtualBox
Open VirtualBox and press the New button to create a virtual machine. In the new window, give the project a name and choose its location. Under Type choose Other, and under Version choose Other/Unknown. Click Next.
Under Memory size choose 16MB and click Next. In the hard disk section, choose Create a virtual hard disk now and click Create.
Under Hard disk file type, leave it as the default VDI VirtualBox format and click Next. For the Storage on physical hard disk section choose Fixed size and click Next.
We've seen different recommendations for your virtual hard disk' size, but 100MB should suffice. Choose that in the next window and click Create.
With the New Machine widget finished, you should be back at the main screen. Right-click on your new virtual machine and choose Settings. Open the Storage tab, where you will remove the CD-ROM attachment and add a floppy drive.
Right-click on the CD icon marked Empty and choose Remove Attachment. Choose Remove in the warning window that appears.
At the bottom of the Storage Devices section click on the + icon to add a new storage controller. Choose I82078 (Floppy). A floppy drive will now be added to your storage devices.
Click the floppy icon with the + sign, which will open a menu for adding disk images. Click the Add button and choose the N1.IMG
file from the folder where you extracted XENIX and then click Choose in the Floppy Disk Selector menu.
Back in the Settings menu, click Ok and you will return to the main window, ready to start XENIX.
Installing XENIX
Click Start and your virtual machine will appear in a new window. After VirtualBox's startup screen, you will be greeted by a bare-bones XENIX boot screen, with the word Boot and a flashing cursor. Advanced users can enter boot switches here, but for now, just press Enter.
After showing basic system information, XENIX will prompt you about System Maintenance Mode. Press Enter and you will be taken to a keyboard selection screen.
Choose your keyboard type, after which you will be taken to the hard disk initialization screen. For your virtual machine, choose option 1. Press Y when asked about overwriting your hard disk. (Don't worry, it's only a virtual disk!)
For most of the next few screens, we'll make use of the default parameters by just entering Q.
Enter Q for the Hard Disk Drive 0 Configuration screen. At the partitioning screen, press 2 to choose the option Use Entire Disk for XENIX and press Enter to continue. Now back at the partitioning screen, enter Q.
At the next screen, for covering bad tracks and Scan Disk, enter Q, then press Enter to use the default value for bad tracks.
At the prompt for swap-space allocation, the default allocation should suffice, so press Enter again.
You will be asked if you want a separate /u
filesystem; choose N.
When asked if you want to make any manual adjustments, enter N.
After your hard disk preparation you will be asked for the serial number and activation key. These are available in the Readme.txt
file in your XENIX folder.
Finally, you will be prompted to remove the floppy disk before resetting the machine.
Press the Right Ctrl button to regain control of your mouse (you will do this numerous times during this process). At the bottom of the window is a floppy icon. Right-click it and select Remove disk from virtual drive. Press any key to reset.
Second Boot
When the machine resets, once again you will be presented with a bare XENIX prompt. Press Enter, and this time the system will run through a new series of checks, and ask you to insert disk B1.
Right-click on the floppy drive and select Choose a disk file (Figure 2). Choose B1.IMG
from the XENIX disk folder and click Open.
Press Enter and you will be asked to assign a root password. After doing so there will be a blinking cursor and nothing happening – give the machine a few moments, XENIX is configuring itself.
Next you will be taken through some prompts for setting your time zone. It will ask you to enter an abbreviation, but you can just enter Q to skip it.
The base image of XENIX is now installed. If you would like to stop and explore XENIX, you can enter 1 at the next prompt, or 2 to install more packages.
If you aren't already prompted by the installer to restart, first remove any floppy image that may still be attached to your virtual disk drive, and then you can reboot with the command:
# reboot
To shutdown, enter:
# shutdown
« Previous 1 2 3 4 Next »
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
TUXEDO Computers Unveils Linux Laptop Featuring AMD Ryzen CPU
This latest release is the first laptop to include the new CPU from Ryzen and Linux preinstalled.
-
XZ Gets the All-Clear
The back door xz vulnerability has been officially reverted for Fedora 40 and versions 38 and 39 were never affected.
-
Canonical Collaborates with Qualcomm on New Venture
This new joint effort is geared toward bringing Ubuntu and Ubuntu Core to Qualcomm-powered devices.
-
Kodi 21.0 Open-Source Entertainment Hub Released
After a year of development, the award-winning Kodi cross-platform, media center software is now available with many new additions and improvements.
-
Linux Usage Increases in Two Key Areas
If market share is your thing, you'll be happy to know that Linux is on the rise in two areas that, if they keep climbing, could have serious meaning for Linux's future.
-
Vulnerability Discovered in xz Libraries
An urgent alert for Fedora 40 has been posted and users should pay attention.
-
Canonical Bumps LTS Support to 12 years
If you're worried that your Ubuntu LTS release won't be supported long enough to last, Canonical has a surprise for you in the form of 12 years of security coverage.
-
Fedora 40 Beta Released Soon
With the official release of Fedora 40 coming in April, it's almost time to download the beta and see what's new.
-
New Pentesting Distribution to Compete with Kali Linux
SnoopGod is now available for your testing needs
-
Juno Computers Launches Another Linux Laptop
If you're looking for a powerhouse laptop that runs Ubuntu, the Juno Computers Neptune 17 v6 should be on your radar.