Real-time plots in 20 lines

The Plot Twists

© Lead Image © Volodymyr Horbovyy,

© Lead Image © Volodymyr Horbovyy,

Article from Issue 244/2021

Use Gnuplot with command-line utilities.

Some excellent charting and plotting packages can be found, but if you're like me, you sometimes just want to do a quick dynamic test plot without a lot of custom setup. Gnuplot is a command-line charting utility that has been around for a while, and I was amazed how easy it was to get up and running. In only 20 lines of scripting code, I was able to create real-time line and bar charts.

In this article, I introduce Gnuplot with two dynamic examples: The first shows the status of Raspberry Pi I/O pins, and the second is a line chart of CPU diagnostics.

Getting Started

Gnuplot [1] can be installed on Linux, Windows, and macOS. To install Gnuplot on Ubuntu, enter:

sudo apt-get install gnuplot

Gnuplot is typically run as a command-line utility, but it can also be run manually, with the charting instructions and data values inserted inline. To plot four sets of data points in a line chart, you could enter:

$ gnuplot
gnuplot> $Mydata << EOD
# Now enter some data
2 1
3 1.5
4 2.1
5 3.3
gnuplot> plot $Mydata with line

Data block names must begin with a $ character, which distinguishes them from other types of persistent variables. The end-of-data delimiter (EOD here) can be any sequence of characters. For this example, the plot command creates a line chart from the $Mydata variable (Figure 1).

Figure 1: A line chart plotted with inline data.

Static Bar Chart

For a simple Gnuplot bar chart, you could plot the real-time status of Raspberry Pi general purpose input/output (GPIO) pins. A static bar chart presentation can be created with a data file (called gpio.dat here):

# gpio.dat - data file for GPIO pin values
# column1 = chart position, column2 = heading, column3 = value
0 GPIO2 0
1 GPIO3 1
2 GPIO4 1
# ...

To plot a bar chart (Figure 2), the fill style and bar width need to be defined. The using 1:3:xtic(2) argument, shown in the next code block, configures the first column in the data file as the x position, the third column as the y value, and the second column as the x-axis labels. Use the interactive commands

$ gnuplot
gnuplot> set style fill solid
gnuplot> set boxwidth 0.5
gnuplot> plot "gpio.dat" using 1:3:xtic(2)with boxes title ""

to plot the file.

Figure 2: A simple bar chart of Raspberry Pi GPIO pins.

Real-Time Bar Chart

The previous example used a manually created gpio.dat data file. The current status of GPIO pins can be found with the gpio command-line utility [2]. For example, to get the status of GPIO pin 9, enter:

gpio read 9

By adding some Bash and an Awk script, you can create a gpio.dat file:

$ gpio read 9
$ gpio read 9 | awk '{ print "9 GPIO9 " $1 }'
9 GPIO9 1
$ gpio read 9 | awk '{ print "9 GPIO9 " $1 }' >gpio.dat
$ cat gpio.dat
9 GPIO9 1

To make a dynamic bar chart, create the gpio_bars.txt Gnuplot script shown in Listing 1. The Gnuplot scripting language is quite powerful and supports a wide range of functions and control statements.

Listing 1

Dynamic Bar Chart

01 # Create a dynamic bar chart that reads GPIO pins every 5 seconds
02 #
03 set title "PI GPIO Data"
04 set boxwidth 0.5
05 set style fill solid
07 # Create a dummy file to get started without errors
08 system "echo '0 GPIO2 1' > gpio.dat"
10 plot "gpio.dat" using 1:3:xtic(2) with boxes title ""
12 while (1) {  # make a new 'gpio.dat' every cycle with fresh data
13   system "echo '' > gpio.dat"
14   do for [i=2:29] {
15     j = i-2 # put first GPIO pin at position 0
16     system "gpio read " .i.  "  | awk '{ print  \"" . j . " GPIO" . i . " \" $1 }' >> gpio.dat
17   }
18   replot
19   pause 5
20 }

Rather than manually adding lines for each GPIO pin status, a for loop can iterate from pins 2 to 29 (lines 14-17). A system command runs the GPIO utility and Bash commands (line 16). To refresh the data, use the replot and pause commands (lines 18 and 19), and enter

gnuplot -persist gpio_bars.txt

to run the script (Figure 3).

Figure 3: Dynamic status of Rasp Pi GPIO pins.

Buy this article as PDF

Express-Checkout as PDF
Price $2.95
(incl. VAT)

Buy Linux Magazine

Get it on Google Play

US / Canada

Get it on Google Play

UK / Australia

Related content

  • Open Data

    A lot of COVID-19 data is available through online REST APIs. With a little ingenuity and some open source tools, you can extract and analyze the data yourself.

  • Workspace: ExifTool

    Understanding the full power of ExifTool can be daunting. We show how to put it to practical use.

  • Go on the Rasp Pi

    We show you how to create a Go web app that controls Raspberry Pi I/O.

  • ACPI Tools

    Linux offers some useful command-line tools that leverage the ACPI power management framework to display detailed data on the status of a laptop battery.

  • Tutorials – Shell Math

    While Bash is not the most advanced environment for doing and visualizing math, its power will surprise you. Learn how to calculate and display your results with shell scripts.

comments powered by Disqus

Direct Download

Read full article as PDF:

Price $2.95