Real-time plots in 20 lines
The Plot Twists

© Lead Image © Volodymyr Horbovyy, 123rf.com
Use Gnuplot with command-line utilities.
Some excellent charting and plotting packages can be found, but if you're like me, you sometimes just want to do a quick dynamic test plot without a lot of custom setup. Gnuplot is a command-line charting utility that has been around for a while, and I was amazed how easy it was to get up and running. In only 20 lines of scripting code, I was able to create real-time line and bar charts.
In this article, I introduce Gnuplot with two dynamic examples: The first shows the status of Raspberry Pi I/O pins, and the second is a line chart of CPU diagnostics.
Getting Started
Gnuplot [1] can be installed on Linux, Windows, and macOS. To install Gnuplot on Ubuntu, enter:
sudo apt-get install gnuplot
Gnuplot is typically run as a command-line utility, but it can also be run manually, with the charting instructions and data values inserted inline. To plot four sets of data points in a line chart, you could enter:
$ gnuplot gnuplot> $Mydata << EOD # Now enter some data 2 1 3 1.5 4 2.1 5 3.3 EOD gnuplot> plot $Mydata with line
Data block names must begin with a $
character, which distinguishes them from other types of persistent variables. The end-of-data delimiter (EOD
here) can be any sequence of characters. For this example, the plot command creates a line chart from the $Mydata
variable (Figure 1).
Static Bar Chart
For a simple Gnuplot bar chart, you could plot the real-time status of Raspberry Pi general purpose input/output (GPIO) pins. A static bar chart presentation can be created with a data file (called gpio.dat
here):
# gpio.dat - data file for GPIO pin values # column1 = chart position, column2 = heading, column3 = value 0 GPIO2 0 1 GPIO3 1 2 GPIO4 1 # ...
To plot a bar chart (Figure 2), the fill style and bar width need to be defined. The using 1:3:xtic(2)
argument, shown in the next code block, configures the first column in the data file as the x position, the third column as the y value, and the second column as the x-axis labels. Use the interactive commands
$ gnuplot gnuplot> set style fill solid gnuplot> set boxwidth 0.5 gnuplot> plot "gpio.dat" using 1:3:xtic(2)with boxes title ""
to plot the file.
Real-Time Bar Chart
The previous example used a manually created gpio.dat
data file. The current status of GPIO pins can be found with the gpio
command-line utility [2]. For example, to get the status of GPIO pin 9, enter:
gpio read 9
By adding some Bash and an Awk script, you can create a gpio.dat
file:
$ gpio read 9 1 $ gpio read 9 | awk '{ print "9 GPIO9 " $1 }' 9 GPIO9 1 $ gpio read 9 | awk '{ print "9 GPIO9 " $1 }' >gpio.dat $ cat gpio.dat 9 GPIO9 1
To make a dynamic bar chart, create the gpio_bars.txt
Gnuplot script shown in Listing 1. The Gnuplot scripting language is quite powerful and supports a wide range of functions and control statements.
Listing 1
Dynamic Bar Chart
01 # Create a dynamic bar chart that reads GPIO pins every 5 seconds 02 # 03 set title "PI GPIO Data" 04 set boxwidth 0.5 05 set style fill solid 06 07 # Create a dummy file to get started without errors 08 system "echo '0 GPIO2 1' > gpio.dat" 09 10 plot "gpio.dat" using 1:3:xtic(2) with boxes title "" 11 12 while (1) { # make a new 'gpio.dat' every cycle with fresh data 13 system "echo '' > gpio.dat" 14 do for [i=2:29] { 15 j = i-2 # put first GPIO pin at position 0 16 system "gpio read " .i. " | awk '{ print \"" . j . " GPIO" . i . " \" $1 }' >> gpio.dat 17 } 18 replot 19 pause 5 20 }
Rather than manually adding lines for each GPIO pin status, a for
loop can iterate from pins 2 to 29 (lines 14-17). A system
command runs the GPIO utility and Bash commands (line 16). To refresh the data, use the replot
and pause
commands (lines 18 and 19), and enter
gnuplot -persist gpio_bars.txt
to run the script (Figure 3).
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Direct Download
Read full article as PDF:
Price $2.95
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Find SysAdmin Jobs
News
-
LibreOffice 7.5 has Arrived and is Loaded with New Features and Improvements
The favorite office suite of the Linux community has a new release that includes some visual refreshing and new features across all modules.
-
The Next Major Release of Elementary OS Has Arrived
It's been over a year since the developers of elementary OS released version 6.1 (Jólnir) but they've finally made their latest release (Horus) available with a renewed focus on the user.
-
KDE Plasma 5.27 Beta Is Ready for Testing
The latest beta iteration of the KDE Plasma desktop is now available and includes some important additions and fixes.
-
Netrunner OS 23 Is Now Available
The latest version of this Linux distribution is now based on Debian Bullseye and is ready for installation and finally hits the KDE 5.20 branch of the desktop.
-
New Linux Distribution Built for Gamers
With a Gnome desktop that offers different layouts and a custom kernel, PikaOS is a great option for gamers of all types.
-
System76 Beefs Up Popular Pangolin Laptop
The darling of open-source-powered laptops and desktops will soon drop a new AMD Ryzen 7-powered version of their popular Pangolin laptop.
-
Nobara Project Is a Modified Version of Fedora with User-Friendly Fixes
If you're looking for a version of Fedora that includes third-party and proprietary packages, look no further than the Nobara Project.
-
Gnome 44 Now Has a Release Date
Gnome 44 will be officially released on March 22, 2023.
-
Nitrux 2.6 Available with Kernel 6.1 and a Major Change
The developers of Nitrux have officially released version 2.6 of their Linux distribution with plenty of new features to excite users.
-
Vanilla OS Initial Release Is Now Available
A stock GNOME experience with on-demand immutability finally sees its first production release.