Build a Long-Range Sensor Network with  ChirpStack

Sensor Symphony

© Lead Image © file404, 123RF.com

© Lead Image © file404, 123RF.com

Article from Issue 298/2025
Author(s):

ChirpStack's LoRaWAN implementation lets you set up long-range wireless traffic for sensors even if you are far from a WiFi access point.

If you have sensors in your house, there are many technologies that you can use to transmit their measurements wirelessly: Bluetooth, Zigbee, Z-Wave, Thread, and even WiFi. However, they all have a limited range. For sensors in your garden, the distance may be just too far. Moreover, for many applications, these technologies are too powerful: They offer much more bandwidth than you need. For monitoring the level of your rainwater tank or the temperature and humidity in your greenhouse, you only need to send a couple of bytes every few minutes.

Networks optimized for these situations are called low-power wide area networks (LPWAN). One such technology is LoRaWAN: It implements wireless communication over longer distances (even exceeding 10km in optimal conditions) with minimal power consumption. The tradeoff is that the data transmission rate is low, limited to a few kilobits per second at most, but that's good enough for garden sensors. The same applies to measurements in farms, vineyards, and many other large areas. By sending a small packet with sensor values every 10 minutes, a LoRaWAN sensor can operate for up to 10 years on a single battery.

In this article, I'll show you how to set up long-range communication in your home. But before getting started, I need to define some basic terminology.

[...]

Use Express-Checkout link below to read the full article (PDF).

Buy this article as PDF

Express-Checkout as PDF
Price $2.95
(incl. VAT)

Buy Linux Magazine

SINGLE ISSUES
 
SUBSCRIPTIONS
 
TABLET & SMARTPHONE APPS
Get it on Google Play

US / Canada

Get it on Google Play

UK / Australia

Related content

  • Instrumented Garden

    Place long-range wireless sensors in a garden and keep track of ambient conditions with gauges and time-based graphs.

  • LoRa Long Range Radio

    WiFi is convenient for devices that are in the same house. If you want to extend the distance, give LoRa a call.

  • Kernel News

    Zack discusses the new GNSS GPS subsystem, new LoRaWAN subsystem, tracking compiler dependencies at config time, and uninlining for Debugging. 

  • Eclipse IoT

    Eclipse IoT is a collection of 26 open source projects with the common goal of building an open development environment for the Internet of Things.

  • ESPHome

    With an ESP32 or Raspberry Pi Pico W microcontroller board, you can easily create your own home automation devices. Thanks to ESPHome, you don't even have to be a programmer.

comments powered by Disqus
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters

Support Our Work

Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.

Learn More

News