The Linux community teems with "distro hoppers," users who are always trying out new distributions. There is nothing at all wrong with that; we are always happy to discover new treasures in the Linux universe. Nevertheless, distro hopping can be hard work. Just downloading and transferring the ISO images to a USB memory stick takes time and involves risks. A simple typo in a command might cause you to move the image to the wrong place by mistake and accidentally delete important data.

Wouldn't it be far simpler if you could simply copy an ISO image off the web to a USB stick with a file manager and boot directly from the drive? Ideally, such a Linux USB memory stick would not only carry a distribution but even offer a selection of systems. For example, you could quickly demonstrate the differences between Ubuntu, Fedora, and Manjaro to a friend without having to prepare and carry around several USB drives. The Ventoy boot manager offers precisely this solution [1].

Installing Ventoy

Ventoy is available for both Linux and Windows. On Linux, however, the program is currently only available in Arch Linux and its Manjaro derivative. Ventoy is found in the Arch User Repository (AUR). To install, you will therefore need to use an AUR helper like Yay, where you load the program into your system by typing yay -S ventoy.

For other distributions, use the release packages provided by the developers [2]. To install, download the ventoy-<version>-linux.tar.gz archive from the project's GitHub page, unpack the tarball, and then run the ./Ventoy2Disk.sh command. Ventoy shows the structure of its syntax and an explanation of the individual parameters. Listing 1 shows the process for the 1.0.18 version, current at the time of writing.

$ tar xzf ventoy-1.0.18-linux.tar.gz
$ cd ventoy-1.0.18
$ ./Ventoy2Disk.sh
***********************************************************
*                Ventoy2Disk Script                       *
*             longpanda  admin@ventoy.net                 *
***********************************************************
Usage:  Ventoy2Disk.sh CMD [ OPTION ] /dev/sdX
  CMD:
   -i  install ventoy to sdX (fail if disk already installed with ventoy)
   -I  force install ventoy to sdX (no matter installed or not)
   -u  update ventoy in sdX
  OPTION: (optional)
   -r SIZE_MB  preserve some space at the bottom of the disk (only for install)
   -s          enable secure boot support (default is disabled)
   -g          use GPT partition style, default is MBR (only for install)

Preparing a USB Memory Stick

Even with Ventoy, you can't avoid formatting a USB memory stick, hard disk, or SSD. However, you only need to perform the operation once. Plug the Ventoy USB drive into the computer and use lsblk or graphical tools such as the Gnome desktop disk manager (Figure 1) to discover the device ID of the Ventoy USB memory stick. Listing 2 shows the lsblk output in a terminal window. The correct device ID can be found using the information on the size of the disk in the fourth column.

Figure 1: You can discover the USB memory stick's device ID to be written to at the command line with lsblk or, as shown here, with the Gnome desktop disk manager.

$ lsblk
NAME     MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda        8:0    0 232,9G  0 disk
|-sda1     8:1    0 232,9G  0 part /home
[...]
sdc        8:32   1   7,5G  0 disk
|-sdc1     8:33   1   256M  0 part /run/media/toff/boot
|-sdc2     8:34   1   7,2G  0 part /run/media/toff/rootfs
[...]
$ sudo ./Ventoy2Disk.sh -i /dev/sdc

Armed with this information, then change back in the terminal to the folder in which you unpacked Ventoy. When you get there, call the program with root privileges (Listing 2, last line). Pass in the -i (install) option and the device ID of the USB drive. To be on the safe side, Ventoy displays the most important information again, such as the device name and the size of the selected data carrier (Figure 2). In this way you can quickly see whether you accidentally specified a hard disk that is normally used for backups.

Figure 2: The command-line tool Ventoy2Disk.sh lets you format a USB memory stick with Ventoy. Afterwards you only need to copy the ISO images to be booted onto the stick.

The Ventoy installation routine now automatically partitions the disk. A small partition is used by the boot manager to start the system; you cannot and never should change anything here. The program searches for ISO images on the partition labeled ventoy and formatted with exFAT. It does not matter how you organize the images there. You can move the ISO files directly into the root folder or organize them in subfolders. The only conditions are that the file names can only contain ASCII characters and spaces can't be used.

Both the developers and the Ventoy community are constantly testing current distributions for compatibility [3]. A wide range of older and recent distros has already been tested, from Debian, Ubuntu, and Fedora through to more exotic candidates such as Zorin, ArcoLinux, and Untangle. The project also supports booting from Windows images and FreeBSD-based systems, including pfSense, GhostBSD, and FreeNAS (see also the box "Secure Boot").

$ sudo ./Ventoy2Disk.sh -s -i /dev/sd<X>

Booting with Ventoy

To boot a Linux distribution with Ventoy, download its ISO image off the web and copy it to the Ventoy partition. This works on Linux as well as on macOS or Windows, because Ventoy uses exFAT for the data partition. You do not need special rights or special programs; a file manager is fine. After the copy process is complete, remove the USB memory stick from the prep computer and boot the target computer with it. Like with any normal Linux image, you need to be sure to boot from the USB drive. Usually you change the boot medium in the UEFI/BIOS or via a boot menu, which can often be enabled by pressing Esc or F12.

Once Ventoy has booted, you now have the option to boot the images copied to the data partition yourself (Figure 3). Use the up and down arrow keys to navigate in the menu, and press Enter to launch the selected image. Ventoy displays all images found on the data partition on one level. If necessary, you can press F3 to enable a tree view. Use Enter to select directories or Esc to move up one level. The menu is updated automatically during the next boot process if you copy more ISO images to the partition or delete existing ones.

Figure 3: Ventoy in use: We simply used the file manager to copy the Linux images to the Ventoy partition on the USB memory stick.