Rescuing and restoring data
Padding
Both tools replace unreadable locations in the image file with zeros. Although this method might make it impossible to save the full structure, you might at least rescue part of it. Because the image generated by ddrescue
can be extremely large, you need to save it to a partition that can deal with these chunks of data. This means that external USB hard disks with FAT32 filesystems are not suitable.
The following example copies the content of the /dev/sde1
partition to /home/tim/copy.img
:
ddrescue /dev/sde1 /home/tim/copy.img logfile
This command stores information in logfile
that allows you to interrupt the copy with Ctrl+C and then continue later with the same command (Figure 4). You can also save the entire disk, rather than just the sde1 partition:

ddrescue /dev/sde /home/tim/copy.img logfile
This command makes sense in particular if blkid
does not recognize any partitions or if you know that the partition table is damaged. If possible, you should create a copy of the image you create. If rescue attempts fail, at least you do not need to waste time reading the faulty disk again. On a more granular level, if you cannot read an individual file, you can at least save its readable parts with the
ddrescue file.txt /media/rescue/file.txt
command.
Cliffhanger
Once you have used ddrescue
to back up a partition, you can try to mount the partition. The following command mounts it as read-only in the /mnt
directory for safety's sake:
mount -o loop,ro /home/tim/copy.img /mnt
Now back up all the important files from the /mnt
directory. In the case of the memory card from the camera, a few photos have already appeared again below /mnt
. After quickly checking with the photographer, it seems that more than half the shots are still missing. So, now it's time to fire the big guns, which only work on umounted media; in other words, time to umount /mnt
.
Checker
If the partition in question uses an ext filesystem, you can now use the command fsck
to fix it:
fsck.ext3 -p copy.img
The parameter -p
tells fsck
to correct the problems directly. On an ext4 filesystem, you would use fsck.ext4
instead of fsck.ext3
. Similarly, fsck.vfat
repairs partitions with a FAT32 filesystem, which is used on USB sticks and SD cards. Once fsck
has completed its work, you can mount the image as before and read the files.
Similar repair tools exist for other filesystems. On NTFS filesystems, for example, ntfsfix
will help; it is part of the ntfsprogs collection, which in turn is part of the NTFS driver. The tool is therefore installed by default on most distributions, so that the ntfsfix copy.img
command will fix the image directly.
« Previous 1 2 3 4 Next »
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you've found an article to be beneficial.
News
-
Fedora 39 Beta is Now Available for Testing
For fans and users of Fedora Linux, the first beta of release 39 is now available, which is a minor upgrade but does include GNOME 45.
-
Fedora Linux 40 to Drop X11 for KDE Plasma
When Fedora 40 arrives in 2024, there will be a few big changes coming, especially for the KDE Plasma option.
-
Real-Time Ubuntu Available in AWS Marketplace
Anyone looking for a Linux distribution for real-time processing could do a whole lot worse than Real-Time Ubuntu.
-
KSMBD Finally Reaches a Stable State
For those who've been looking forward to the first release of KSMBD, after two years it's no longer considered experimental.
-
Nitrux 3.0.0 Has Been Released
The latest version of Nitrux brings plenty of innovation and fresh apps to the table.
-
Linux From Scratch 12.0 Now Available
If you're looking to roll your own Linux distribution, the latest version of Linux From Scratch is now available with plenty of updates.
-
Linux Kernel 6.5 Has Been Released
The newest Linux kernel, version 6.5, now includes initial support for two very exciting features.
-
UbuntuDDE 23.04 Now Available
A new version of the UbuntuDDE remix has finally arrived with all the updates from the Deepin desktop and everything that comes with the Ubuntu 23.04 base.
-
Star Labs Reveals a New Surface-Like Linux Tablet
If you've ever wanted a tablet that rivals the MS Surface, you're in luck as Star Labs has created such a device.
-
SUSE Going Private (Again)
The company behind SUSE Linux Enterprise, Rancher, and NeuVector recently announced that Marcel LUX III SARL (Marcel), its majority shareholder, intends to delist it from the Frankfurt Stock Exchange by way of a merger.