3D Designer
Modules
At some point, things are going to get complex. You are going to have objects twisted around other objects, modifying other objects that are used in combination with yet more objects.
It helps then that openSCAD supports modules to organize stuff. Modules are simply a bunch of instructions that go together.
To illustrate how they work, let's make a funnel as shown in Figure 7.
A funnel is made up by two parts: a hollow, cut-off conical object that I am going to call the hat (I couldn't find formal names for the parts of a funnel, so I am improvising here), and a hollow cylinder I am calling the pipe.
Turns out both the hat and the pipe can be made entirely from cylinders, since the hat, for openSCAD, is a cylinder with two different diameters at each end. As you need it to be hollow, you make another cylinder with a slightly smaller radius at both ends and subtract that from the bigger one. The module for that would look like Listing 3.
Listing 3
Hat Module
module hat () { difference () { cylinder (r1=8, r2=2, h=10, center=true, $fn=50); cylinder (r1=7.5, r2=1.5, h=10, center=true, $fn=50); } }
The pipe module is even simpler (Listing 4), but you do have to remember to translate the lower end of the pipe to the top of the hat (line 2).
Listing 4
Pipe Module
01 module pipe () { 02 translate ([0,0,10]) { 03 difference () { 04 cylinder (r=2, h=10, center=true, $fn=50); 05 cylinder (r=1.5, h=10, center=true, $fn=50); 06 } 07 } 08 }
With these two modules, you can create a funnel ()
module that calls the other two (Listing 5, lines 17 to 20). Then call the funnel ()
module to actually show something in the preview pane (Listing 5, line 22).
Listing 5
funnel.scad
01 module hat () { 02 difference () { 03 cylinder (r1=8, r2=2, h=10, center=true, $fn=50); 04 cylinder (r1=7.5, r2=1.5, h=10, center=true, $fn=50); 05 } 06 } 07 08 module pipe () { 09 translate ([0,0,10]) { 10 difference () { 11 cylinder (r=2, h=10, center=true, $fn=50); 12 cylinder (r=1.5, h=10, center=true, $fn=50); 13 } 14 } 15 } 16 17 module funnel () { 18 hat (); 19 pipe (); 20 } 21 22 funnel ();
You can take this modularity further and save a set of modules into a separate .scad file altogether. You can then import them back into other files using either the include
or the use
methods.
The include </path/to/file.scad>
method imports the whole thing, modules and commands that are not in modules, integrating the whole imported file into your current file. The use </path/to/file.scad>
method, on the other hand, only imports the modules so you can use them as library modules with the code in your current file.
This means that, to get a funnel with include
, all you have to do is:
include <funnel.scad>;
To do the same with use
, you would also have to call the funnel ()
method like this:
use <funnel.scad>; funnel ();
Conclusion
This article has covered the most essential bits and pieces of the OpenSCAD language. With this and the user manual's excellent documentation [5], you should be able to start creating your first 3D pieces.
That said, there is quite a lot more to learn regarding OpenSCAD. We'll be looking at more advanced things in next month's issue. We will also be creating a real piece to print and showing how you can go all the way from concept to real physical object.
Until then, have fun!
Infos
- Thingiverse: https://www.thingiverse.com/
- Atelier: https://atelier.kde.org/
- OpenSCAD: http://www.openscad.org
- FreeCAD: https://www.freecadweb.org/
- OpenSCAD User Manual: https://en.wikibooks.org/wiki/OpenSCAD_User_Manual
« Previous 1 2 3
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Direct Download
Read full article as PDF:
Price $2.95
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
News
-
An All-Snap Version of Ubuntu is In The Works
Along with the standard deb version of the open-source operating system, Canonical will release an-all snap version.
-
Mageia 9 Beta 2 Ready for Testing
The latest beta of the popular Mageia distribution now includes the latest kernel and plenty of updated applications.
-
KDE Plasma 6 Looks to Bring Basic HDR Support
The KWin piece of KDE Plasma now has HDR support and color management geared for the 6.0 release.
-
Bodhi Linux 7.0 Beta Ready for Testing
The latest iteration of the Bohdi Linux distribution is now available for those who want to experience what's in store and for testing purposes.
-
Changes Coming to Ubuntu PPA Usage
The way you manage Personal Package Archives will be changing with the release of Ubuntu 23.10.
-
AlmaLinux 9.2 Now Available for Download
AlmaLinux has been released and provides a free alternative to upstream Red Hat Enterprise Linux.
-
An Immutable Version of Fedora Is Under Consideration
For anyone who's a fan of using immutable versions of Linux, the Fedora team is currently considering adding a new spin called Fedora Onyx.
-
New Release of Br OS Includes ChatGPT Integration
Br OS 23.04 is now available and is geared specifically toward web content creation.
-
Command-Line Only Peropesis 2.1 Available Now
The latest iteration of Peropesis has been released with plenty of updates and introduces new software development tools.
-
TUXEDO Computers Announces InfinityBook Pro 14
With the new generation of their popular InfinityBook Pro 14, TUXEDO upgrades its ultra-mobile, powerful business laptop with some impressive specs.