Create a custom Raspberry Pi OS image
Tailor Made
© Photo by Johnny Briggs on Unsplash
A few simple steps let you create a preconfigured Raspberry Pi operating system that lets you cut the time required to burn and configure your OS images.
To get a Raspberry Pi up and running, you need to download the latest operating system (OS) release image, burn it to an SD card, slide the card into the Pi, and power it up. After the Pi boots, you log in with the default credentials and run sudo raspi-config to configure WiFi, locale, keyboard, and time zone and to enable SSH, I2C, a camera, and whatever else you need for I/O. Next, you update the OS with sudo apt update, sudo apt upgrade, and reboot before finally logging back in and installing all your favorite software that is not installed on the base image.
For casual Pi users, this procedure is a one-time or rare task. However, for experienced makers who have gone through this drill dozens – if not hundreds – of times, it is a real pain.
In this article, I present a method to create your own custom Raspberry Pi OS image that is just under 2GB in size, making it very fast to burn to any size SD card. No more waiting for an 8 or 16GB image to burn. This custom image not only burns fast, but when it boots, it expands the root filesystem to the full size of the target SD card. When the boot completes, you have a clean Pi OS system with your preferred customizations. No more raspi-config and wasting time installing your preferred software.
[...]
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Framework Laptop 13 Pro Competes with the Best
Framework has released what might be considered the MacBook of Linux devices.
-
The Latest CachyOS Features Supercharged Kernel
The latest release of CachyOS brings with it an enhanced version of the latest Linux kernel.
-
Kernel 7.0 Is a Bit More Rusty
Linux kernel 7.0 has been released for general availability, with Rust finally getting its due.
-
France Says "Au Revoir" to Microsoft
In a move that should surprise no one, France announced plans to reduce its reliance on US technology, and Microsoft Windows is the first to get the boot.
-
CIQ Releases Compatibility Catalog for Rocky Linux
The company behind Rocky Linux is making an open catalog available to developers, hobbyists, and other contributors, so they can verify and publish compatibility with the CIQ lineup.
-
KDE Gets Some Resuscitation
KDE is bringing back two themes that vanished a few years ago, putting a bit more air under its wings.
-
Ubuntu 26.04 Beta Arrives with Some Surprises
Ubuntu 26.04 is almost here, but the beta version has been released, and it might surprise some people.
-
Ubuntu MATE Dev Leaving After 12 years
Martin Wimpress, the maintainer of Ubuntu MATE, is now searching for his successor. Are you the next in line?
-
Kali Linux Waxes Nostalgic with BackTrack Mode
For those who've used Kali Linux since its inception, the changes with the new release are sure to put a smile on your face.
-
Gnome 50 Smooths Out NVIDIA GPU Issues
Gamers rejoice, your favorite pastime just got better with Gnome 50 and NVIDIA GPUs.