Senior citizen-friendly video telephony system with a Raspberry Pi
Picking Up a Phone Call
The receiving side does not need to go through as much trouble because I assume that the children and grandchildren have a PC or smartphone. To receive the call from grandma and grandpa, all they have to do is open the link from the email into a web browser, and the grandparents appear on the screen.
Theory and Practice
During the first field test of the full setup, massive interference in the microphone signal occurred in Jitsi. In a direct test of the microphone and sound card (on the Raspberry Pi and a Windows PC), the errors could not be reproduced, so the hardware is obviously not responsible.
The explanation was too weak a power supply, which was overtaxed by supplying power to the Raspberry Pi, sound card, and webcam. A better power supply quickly provided a remedy; alternatively, the use of a USB hub with its own power supply is also an option.
It turns out that the third generation of the Raspberry Pi is overtaxed by high-definition video telephony. Transferring the picture and sound without interruption proved to be a difficult task. On the one hand, the latency caused a noticeable delay during the call. On the other, the echo and acoustic feedback effects disturbed the sound because I couldn't shield the webcam's microphone against the TV's speakers.
If you don't want to upgrade to a far more powerful Raspberry Pi 4, you can mitigate both issues by reducing the CPU load during the video call – which is why Jitsi is called with the parameters shown in the scripts. The picture and sound quality are not perfect, but good enough.
Sources of Error
In the initial phase with the video telephony system, it quite often happened that my grandparents accidentally switched their Sony TV to standby with the remote control while the Raspberry Pi was still running. After that, setting the HDMI input to inactive did not work as desired because the TV did not know what signal source it had been displaying before the Raspberry Pi. The Raspberry Pi's HDMI input remained the last activated input source, and my grandparents needed help because they did not know how to switch to the TV function on the TV. Disaster: the TV stayed black even after it was switched back on.
The attempt to switch the signal source actively to a TV channel by CEC before shutdown did not succeed. In the worst case, the TV still showed a black screen after switching on, but at least it switched back to a TV channel after starting and shutting down video telephony. Some CEC functions are supposed to control the TV's digital tuner remotely; however, in the setup used here, the call from the Raspberry Pi reported that the command was not recognized.
The Sony's remote control has a button for switching between analog and digital, which can also switch the signal input back to the TV. Fortunately, I could communicate this information by telephone. Happily, my grandparents only make this mistake once in a while and should improve their skills over time. To eliminate this source of error completely, the system would have to be given its own TV set. Smaller devices are available second-hand for just a few dollars.
« Previous 1 2 3 4 Next »
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Direct Download
Read full article as PDF:
Price $2.95
News
-
The First Point Release For Ubuntu 22.04 is Now Available
Canonical has released the first point upgrade for Jammy Jellyfish which includes important new toolchains and fixes.
-
Kali Linux 2022.3 Released
From the creators of the most popular penetration testing distributions on the planet, comes a new release with some new tools and a community, real-time chat option.
-
The 14" Pinebook Pro Linux Laptop is Shipping
After a considerable delay, the 14" version of the Pinebook Pro laptop is, once again, available for purchase.
-
OpenMandriva Lx ROME Technical Preview Released
OpenMandriva’s rolling release distribution technical preview has been released for testing purposes and adds some of the latest/greatest software into the mix.
-
Linux Mint 21 is Now Available
The latest iteration of Linux Mint, codenamed Vanessa, has been released with a new upgrade tool and other fantastic features.
-
Firefox Adds Long-Anticipated Feature
Firefox 103 has arrived and it now includes a feature users have long awaited…sort of.
-
System76 Refreshes Their Popular Oryx Pro Laptop with a New CPU
The System76 Oryx Pro laptop has been relaunched with a 12th Gen CPU and more powerful graphics options.
-
Elive Has Released a New Beta
The Elive team is proud to announce the latest beta version (3.8.30) of its Enlightenment-centric Linux distribution.
-
Rocky Linux 9 Has Arrived
The latest iteration of Rocky Linux is now available and includes a host of new features and support for new architecture.
-
Slimbook Executive Linux Ultrabook Upgrading Their CPUs
The Spanish-based company, Slimbook, has made available their next generation Slimbook Executive Linux ultrabooks with a 12th Gen Intel Alder Lake CPU.