A command-line file manager

Standard View

To open a view of the directory tree, you use:

br -dp

which is similar to ls -la. However, broot supports interactive operation, as well as searching in directories and direct actions against the files and folders. If you want to keep this (or some other) view as the default, define it in the config file under ~/.config/broot/conf.hjson by removing the comment sign in front of default flags and entering the desired view.

While you are in the config file, you might want to adjust the color output to suit your preferences under skins. Broot can theoretically also display file type icons [9], but I was unable to configure this; instead, empty rectangles appeared rather than icons.

The config file's location follows XDG convention, which is dependent on your system settings. The fastest way to find the configuration file is to type a question mark in broot's search field, which launches a help screen. From the help screen, you can then open the file in your system's editor by typing os (for open_stay).

By default, broot uses two panels (Figure 4), but you can increase the number in the configuration file. You can open an additional panel by pressing Ctrl+Right arrow. If you want to open a file and exit broot at the same time, you can do this by pressing Alt+Enter. Otherwise, select Ctrl+Q to exit broot when you are finished.

Figure 4: Broot lets you use multiple panels side by side. You can copy files back and forth between panels using cpp.

Using arguments, you can add desired attributes to the view at startup. For example, br -h toggles hidden files, while br -gi toggles .gitignore files that would normally be hidden. Broot clarifies the status of these two attributes with a y or n in the search field bottom right. For both of these arguments, you can use br -d to see the date of the last change.

To find out which files and folders are taking up the most space, you can use "whale spotting" mode (br -w) to get a list of files sorted by size; broot visualizes the size ratios as a bar chart in a similar way to ncdu or GDU (Figure 5).

Figure 5: The --whale-spotting (-w) option shows which files or folders are resource hogs.

Fuzzy Search

The search field, located bottom left, is one of broot's strengths. Directly above the search, a status bar indicates what an entered command does or if an argument is incorrect, as appropriate.

You can use broot's fuzzy search capability to find files, even if you've forgotten the exact file name. For example, if you are unsure about how to spell "LinuxUser" but know that it contains the three letters l, x, and u in that order (sequential, but not necessarily consecutive order), broot can find all of the files whose names contained those three letters in that specific order (Figure 6).

Figure 6: Broot's ability to use a fuzzy search helps you to find files or directories whose names or spellings you have forgotten.

If you introduce the search term with a slash, you can also use regular expressions. A question mark entered in the search field calls the built-in help, which offers a subset of the detailed documentation found under the Usage tab on the website [10].

If you want to run a search on very large or very slow disks, it may be necessary to enable :total_search or press Ctrl+S to ensure that broot searches the entire disk.

To exit broot but first change to a directory in the shell beforehand using cd, navigate to the desired directory and press Alt+Enter. If you apply the same key combination to a file, broot again exits and opens the file with the associated application. Speaking of shells: Alongside Bash or Dash, broot also works well with Z shell and Fish.

Verbs

You can also use the search field to enter verbs, which the developers explain on the website under Usage | Verbs & Commands [11]. These verbs are actually Linux commands that you can execute directly in broot. To list all the available verbs, enter a question mark in the search field. In addition, you can also define verbs yourself in the broot configuration file.

The search field has two modes: input mode and command mode. Use command mode to find content. If you want to use verbs here, you must enter a space or a colon as a prefix followed by the verb and, where needed, an argument. For example, to open a file in your favorite editor, navigate to the file and type Space+E or Shift+.+E in the search field.

The frequently-used commands mv, cp, rm, and mkdir are available as verbs. In addition, d shows the last change date, pe lists the ownership, ss sorts directories and files by size, and h unearths hidden files. For directories managed by Git, gf displays the number of changed or new files at the top of a status line, while gs maps the git status command. You can also combine searches with commands. Navigate to a file by typing a letter and then, without removing the search term with Esc, delete the file with :rm.

If you work with panels, you can also use the cpp (copy to panel) verb; it supports copying from one panel to the other. For example, exporting directory trees with the pt (print tree) command exports the directory tree to the shell. You also can modify the command in the configuration file to export to a specific directory. To start broot in a monochrome look and without decoration, type broot --no-style.

Buy this article as PDF

Express-Checkout as PDF
Price $2.95
(incl. VAT)

Buy Linux Magazine

SINGLE ISSUES
 
SUBSCRIPTIONS
 
TABLET & SMARTPHONE APPS
Get it on Google Play

US / Canada

Get it on Google Play

UK / Australia

Related content

  • Command Line: tree

    The tree command can provide a clear view of all your files and directories and offers a few advantages over the usual ls command.

  • Ncdu

    Ncdu adds some GUI-like features to the classic du command.

  • Make New Friends

    If you are looking for modern display options or more speed at the command line, these alternatives to traditional Unix commands may be just what you need.

  • Czkawka

    Czkawka helps find and remove duplicate and obsolete files to free up valuable disk space.

  • Sunflower File Manager

    Sunflower is a highly configurable graphical file manager with two windows that implement an unusual concept by trying to integrate the command line with the file manager.

comments powered by Disqus
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters

Support Our Work

Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.

Learn More

News