Measuring performance with the perf kernel tool
Inside Job
The kernel supports performance analysis with built-in tools via the Linux performance counters subsystem. perf is easy to use and offers a detailed view of performance data.
Making systems faster is a core part of business. Optimizing resources in data centers can save energy, space, and costs, and, out in the real world, a faster start-up time can improve the user experience for an entertainment system in the living room or even a car in the driveway.
In complex systems with many components, performance problems can stem from many different causes. On the hardware side, the CPU, RAM, the bus load, the memory system (block I/O), or the network can contribute to performance issues. On the software side, the operating system, the execution environment of the programming language, libraries, or the application itself can create bottlenecks. The fact that these components also often influence each other makes things more difficult. Although the systems work without any problems on their own, their interaction leads to friction.
To identify the root cause in the interaction of all these components requires the observer to take a bird's eye view and also have detailed knowledge of all the components. Not many IT professionals combine these skills, thus making performance optimization an exciting but challenging activity.
Fortunately, several useful tools are available for monitoring performance issues, including well-known utilities such as ps
, stat
, top
, htop
, OProfile [1], SystemTap [2], and so on.
One of the most useful performance monitoring tools is perf
[3], which has been part of the kernel since version 2.6.31. perf
uses the kernel's performance counter subsystem and supports both profiling and tracing.
During profiling, Perf evaluates data from hardware registers that count specific hardware events. Thus, it generates statistics at certain times in order to gain an impression of the system. The accuracy depends on the frequency of measurement.
In tracing, however, perf
logs certain events using trace points. These include software events such as context changes, but also hardware events such as executed instructions, cache requests, and so on. System messages are also included.
Admins and developers should keep in mind that tracing can have a major influence on the system. In general, you need to take into account that the measurements themselves can influence the measurement results.
Installation
The perf
program is part of the Linux kernel and located in the tools/perf
directory. As the output from make tools/help
shows, you can install with make -C perf_install
. You can also simply change the directory to /usr/src/<Linux_version>/tools/perf
and execute make
there.
Because certain perf
functions depend on the Linux application binary interface (ABI), distributions often ship one package per kernel version. Under Ubuntu 18.10, the linux-tools-generic
package always installs the appropriate perf
version.
If you want meaningful output, you also need to install the debug symbols for the programs you wish to example – just as you would with a debugger. The debug symbols are usually stored in separate archives. The packages automatically generated on Debian and Ubuntu 18.10 have an extension of -dbgsym
, and the manually generated packages have an extension of -dbg
.
Workflow
perf
supports more than two dozen subcommands. For an overview, type the command without any parameters or check out the perf
wiki [4]. People who use perf
usually start with perf list
. This command displays the available events (Listing 1), which you can then count with perf stat
. The record
command writes data to the hard disk; report
displays the data for searching. script
supports further evaluation of the data at the end.
Listing 1
Outputting Hardware Events (excerpt)
01 $ sudo perf list hardware 02 03 List of pre-defined events (to be used in -e): 04 05 branch-instructions OR branches [Hardware event] 06 branch-misses [Hardware event] 07 bus-cycles [Hardware event] 08 cache-misses [Hardware event] 09 [...]
Events
The Admin perf list
command also gives an optional argument on request (refer to Listing 1). This argument may be the type of the event, for example hw
or tracepoint
, or a regular expression, as in Listing 2.
Listing 2
Events at Block Level (excerpt)
01 $ sudo perf list 'block:*' 02 03 List of pre-defined events (to be used in -e): 04 05 block:block_bio_backmerge [Tracepoint event] 06 block:block_bio_bounce [Tracepoint event] 07 block:block_bio_complete [Tracepoint event] 08 block:block_bio_frontmerge [Tracepoint event] 09 block:block_bio_queue [Tracepoint event] 10 [...]
Each end of line contains the event type in square brackets. In addition, you normally have to look into the source code to see the exact meaning of the event. You can use the --events
or -e
switch to state the events to be considered.
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Armbian 24.11 Released with Expanded Hardware Support
If you've been waiting for Armbian to support OrangePi 5 Max and Radxa ROCK 5B+, the wait is over.
-
SUSE Renames Several Products for Better Name Recognition
SUSE has been a very powerful player in the European market, but it knows it must branch out to gain serious traction. Will a name change do the trick?
-
ESET Discovers New Linux Malware
WolfsBane is an all-in-one malware that has hit the Linux operating system and includes a dropper, a launcher, and a backdoor.
-
New Linux Kernel Patch Allows Forcing a CPU Mitigation
Even when CPU mitigations can consume precious CPU cycles, it might not be a bad idea to allow users to enable them, even if your machine isn't vulnerable.
-
Red Hat Enterprise Linux 9.5 Released
Notify your friends, loved ones, and colleagues that the latest version of RHEL is available with plenty of enhancements.
-
Linux Sees Massive Performance Increase from a Single Line of Code
With one line of code, Intel was able to increase the performance of the Linux kernel by 4,000 percent.
-
Fedora KDE Approved as an Official Spin
If you prefer the Plasma desktop environment and the Fedora distribution, you're in luck because there's now an official spin that is listed on the same level as the Fedora Workstation edition.
-
New Steam Client Ups the Ante for Linux
The latest release from Steam has some pretty cool tricks up its sleeve.
-
Gnome OS Transitioning Toward a General-Purpose Distro
If you're looking for the perfectly vanilla take on the Gnome desktop, Gnome OS might be for you.
-
Fedora 41 Released with New Features
If you're a Fedora fan or just looking for a Linux distribution to help you migrate from Windows, Fedora 41 might be just the ticket.