The sys admin's daily grind: Varnish
Slow and Steady
![](/var/linux_magazin/storage/images/issues/2013/157/charly-s-column-varnish/kuehnast_charly_4.png/601044-1-eng-US/Kuehnast_Charly_4.png1_medium.png)
Columnist Charly gives Apache a slick coat of Varnish for better performance.
One still hears the saying, "Salad tastes much better if you replace it with a juicy steak shortly before you dine," although the humor is debatable. Admins are given tips in the same vein: "Apache delivers static content much faster if you replace it with Nginx shortly before the launch." The saying may not faze vegetarians, but it can cause a stir among server admins, including me.
I've just been assigned the task of tweaking Apache 2.2, which outputs almost only static content, for maximum performance. For several reasons, I can't just send the old guy into the desert. Apache is undisputed in terms of flexibility; however, when it comes to performance, it doesn't even bother to take off in pursuit of its rivals.
If I'm not allowed to ditch Apache, I would at least like to put it on a faster steed, such as a fast cache like Varnish [1]. The makers of Varnish designed it from scratch as a caching instance, and its capabilities are accordingly powerful. I could create complex rules in the specially provided Varnish Cache Language (VCL), but for buffering a static website, all I really need is a lean configuration. To begin, I reroute Apache using NameVirtualHost
and Lists
so that it listens on port 8080 instead of port 80 in future; Varnish can then take over on port 80, and its cache can pass on rich content directly to the client.
Most distributions include Varnish. Debian and its derivatives configure Varnish in /etc/default/varnish
, whereas Red Hat and its relatives use /etc/sysconfig/varnish
. I just need to adjust the command-line parameters for the call (DAEMON_OPTS
). Figure 1 shows the configuration I use for my Apache accelerator; -a :80
specifies that Varnish accepts connections to port 80 on all IPv4 and IPv6 addresses. The -b
parameter tells Varnish where Apache has set up camp.
A running Varnish can be controlled via a Telnet interface whose address and port are specified with the -T
option. For security reasons, I only open the port on localhost
. Additionally, I must know the secret, which is stored in the file for the -S
parameter. The -u
and -g
parameters define the username and group membership, as you might expect.
Cache and Carry
The last line, with the -s
parameter, is the most important one in terms of performance, because it controls the type and size of the cache. I can create the cache in RAM or on a disk partition. In this case, I type:
file, /var/cache/varnish.cache,50%
Varnish then uses up to half of the disk space below /var/cache
. The tool occupies the space immediately, but the cache file only grows gradually.
Cold Turkey
Still, no one should expect miracles from a disk cache. My server fortunately has 16GB of RAM: Apache and Varnish consume some of this, but I can afford to hand over 10GB to the cache. If you try to skimp here, Varnish detours into swap space, and the speed advantage is gone. Thus, with -s malloc,10g
, my legacy Apache can gallop off happily into the sunset.
Infos
- Varnish: http://www.varnish-cache.org
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
![Learn More](https://www.linux-magazine.com/var/linux_magazin/storage/images/media/linux-magazine-eng-us/images/misc/learn-more/834592-1-eng-US/Learn-More_medium.png)
News
-
NVIDIA Released Driver for Upcoming NVIDIA 560 GPU for Linux
Not only has NVIDIA released the driver for its upcoming CPU series, it's the first release that defaults to using open-source GPU kernel modules.
-
OpenMandriva Lx 24.07 Released
If you’re into rolling release Linux distributions, OpenMandriva ROME has a new snapshot with a new kernel.
-
Kernel 6.10 Available for General Usage
Linus Torvalds has released the 6.10 kernel and it includes significant performance increases for Intel Core hybrid systems and more.
-
TUXEDO Computers Releases InfinityBook Pro 14 Gen9 Laptop
Sporting either AMD or Intel CPUs, the TUXEDO InfinityBook Pro 14 is an extremely compact, lightweight, sturdy powerhouse.
-
Google Extends Support for Linux Kernels Used for Android
Because the LTS Linux kernel releases are so important to Android, Google has decided to extend the support period beyond that offered by the kernel development team.
-
Linux Mint 22 Stable Delayed
If you're anxious about getting your hands on the stable release of Linux Mint 22, it looks as if you're going to have to wait a bit longer.
-
Nitrux 3.5.1 Available for Install
The latest version of the immutable, systemd-free distribution includes an updated kernel and NVIDIA driver.
-
Debian 12.6 Released with Plenty of Bug Fixes and Updates
The sixth update to Debian "Bookworm" is all about security mitigations and making adjustments for some "serious problems."
-
Canonical Offers 12-Year LTS for Open Source Docker Images
Canonical is expanding its LTS offering to reach beyond the DEB packages with a new distro-less Docker image.
-
Plasma Desktop 6.1 Released with Several Enhancements
If you're a fan of Plasma Desktop, you should be excited about this new point release.